Audio-Technica AT-VMN95E Elliptical Replacement Stylus for the Audio Technica VM95 series cartridge. This stylus is included with both the Audio Technica LP120XUSB and LPW40WN turntables.
The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine body, therefore each of the six replacement styli is perfectly compatible.
| Brand | Audio-Technica |
|---|---|
| Warranty | Australian Manufacturer Warranty |
A 12V trigger is a control mechanism used in audio/video systems and home automation setups. It involves sending a 12-volt electrical signal (often low voltage) to trigger specific actions in compatible devices. These triggers are commonly used to coordinate the power state and actions of various components in a multimedia or home theatre system. Here's how it generally works:
Control Device (Transmitter): This device, such as an AV receiver, preamplifier, or home automation controller, generates a 12V trigger output signal.
Trigger Cable: A specialised cable with a 3.5mm mono jack on each end is used to carry the 12V trigger signal. One end is connected to the control device's trigger output, and the other end is connected to the trigger input on the target device.
Target Device (Receiver): This device could be a power amplifier, motorised projector screen, motorised curtains, cooling system, or any other equipment that needs to be controlled based on trigger signals.
When the control device sends out the 12V trigger signal, the target device responds accordingly. Common scenarios include:
Power On: When the control device powers on, it sends a 12V trigger signal to the target device, causing it to turn on as well. This is especially useful for amplifiers, subwoofers, or other components that should be active when the system is in use.
Power Off: Conversely, when the control device is powered off, it can send a 12V trigger signal to the target device, prompting it to power down. This ensures that all components shut down in a synchronised manner.
Other Actions: 12V triggers can also be used for actions beyond powering on/off, such as activating ventilation systems, adjusting lighting, or even triggering motorised mechanisms like projector lifts.
This automation simplifies the user experience and ensures that devices work harmoniously without the need for manual intervention. However, it's essential to ensure compatibility between devices, as not all components support 12V trigger functionality. Some systems also offer multiple trigger outputs or inputs, allowing for more complex setups where a single control signal can manage several devices simultaneously.
DAB stands for "Digital Audio Broadcasting." It is a digital radio technology that allows for the transmission of radio signals in a digital format, as opposed to the traditional analog radio broadcasts. DAB offers several advantages over analog radio, including improved sound quality, more efficient use of spectrum, and the ability to transmit additional data such as song information, traffic updates, and program guides.
Key features of DAB include:
Digital Sound Quality: DAB provides better sound quality compared to analog radio broadcasts. It eliminates the static, interference, and signal degradation commonly associated with analog FM/AM radio.
More Stations: DAB allows for more radio stations to be broadcast within the same frequency spectrum. This means listeners have access to a wider variety of stations and content.
Text and Data Services: DAB can transmit additional data alongside audio signals. This enables broadcasters to display text information on radio displays, such as song titles, artist names, news headlines, and more. It also supports data services like traffic updates and program schedules.
Automatic Tuning and Station Identification: DAB radios can automatically scan and tune to available stations, and they often display a list of available stations for easy selection.
Better Reception: DAB reception is generally more robust than analog radio. Listeners experience fewer issues like fading, interference, and static.
Energy Efficiency: DAB's digital transmission is more energy-efficient than analog broadcasting, contributing to reduced energy consumption.
DAB is not just limited to traditional FM/AM radio; it can also be used for specialized digital radio services, including niche genres, local broadcasts, and exclusive content. However, the adoption of DAB has varied across different regions and countries. Some areas have embraced DAB and offer a wide range of DAB radio stations, while others continue to rely primarily on analog radio or other digital broadcasting technologies.
It's worth noting that there are different versions and standards of digital radio, and DAB is just one of them. Other digital radio standards include DAB+, HD Radio, and DRM (Digital Radio Mondiale). Each standard has its own features and variations, but they all share the common goal of providing improved audio quality and additional features compared to traditional analog radio.
AirPlay is a wireless technology developed by Apple that allows you to stream audio, video, and other content from Apple devices to compatible speakers, televisions, and other devices. It enables you to share media and mirror your device's screen on larger displays. AirPlay is available on various Apple products, including iPhones, iPads, Mac computers, and Apple TVs.
Here are some key features and uses of AirPlay:
Streaming Audio: With AirPlay, you can wirelessly stream music, podcasts, and other audio content from your Apple device to AirPlay-enabled speakers, sound systems, or smart TVs. This allows you to enjoy your favorite tunes with better audio quality on larger speakers.
Streaming Video: AirPlay also supports streaming video content from your Apple device to an AirPlay-compatible television or projector. This is particularly useful for watching videos, movies, or even mirroring your device's screen onto a larger display for presentations or entertainment.
Screen Mirroring: AirPlay supports mirroring your iPhone, iPad, or Mac screen onto an Apple TV or another compatible display. This is handy for sharing content with a larger audience, giving presentations, or simply displaying your device's interface on a bigger screen.
Multi-Room Audio: With AirPlay 2, the technology was expanded to support multi-room audio. This means you can play the same audio content on multiple AirPlay 2-enabled speakers throughout your home, creating a synchronized audio experience in different rooms.
Control and Compatibility: AirPlay works seamlessly with Apple devices, and many third-party devices and apps also support AirPlay functionality. These devices might include speakers, receivers, smart TVs, and more. Keep in mind that while some devices might support audio-only AirPlay, others might support video streaming and screen mirroring as well.
AirPlay 2: AirPlay 2 is an updated version of the technology that offers improved performance and additional features like multi-room audio support, better synchronization, and enhanced compatibility with a wider range of devices.
To use AirPlay, make sure both your source device (iPhone, iPad, Mac) and the target device (speakers, TV, etc.) are connected to the same Wi-Fi network. Then, simply use the AirPlay icon or option on your device's control panel to select the target device and start streaming. The content will be sent wirelessly, allowing you to enjoy your media on a larger screen or through better speakers.
Aspect ratio refers to the proportional relationship between the width and height of an image, screen, or display. It is expressed as a ratio of the width to the height. Aspect ratio is an important consideration in various forms of media, including television, movies, computer monitors, and digital content.
Common Aspect Ratios:
4:3 (1.33:1): This aspect ratio was standard for older television broadcasts and early computer monitors. It is relatively more square in shape.
16:9 (1.78:1): Also known as widescreen, this is the most common aspect ratio for modern high-definition television (HDTV) and computer monitors. It provides a wider viewing area.
21:9 (2.33:1): This ultra-wide aspect ratio is often used in cinematic displays, offering an even wider and more immersive viewing experience, particularly popular for gaming and some movie formats.
2.39:1 and 2.40:1: These are common aspect ratios for many movies, especially those presented in widescreen formats in theaters. They provide a wide cinematic scope.
Aspect ratio is a critical factor in how content is displayed. For example, if you have a movie with a widescreen aspect ratio (e.g., 2.39:1) and you watch it on a 16:9 TV, you might see black bars at the top and bottom of the screen to maintain the original aspect ratio.
It's worth noting that aspect ratios can affect how content is displayed and how it appears on different screens. Some content might be cropped or letterboxed (with black bars) to fit a particular aspect ratio, while other content might be stretched or distorted if not displayed at its intended aspect ratio.
When working with displays or media content, understanding aspect ratios can help you choose the appropriate settings and ensure that your content is displayed correctly and aesthetically.
Brightness in projectors refers to the amount of light a projector emits to create a visible image on a screen or surface. It is typically measured in lumens, which is a unit of measurement for the total quantity of visible light emitted by a light source.
Projector brightness is an important consideration when choosing a projector for different environments and applications. The appropriate level of brightness depends on factors such as the size of the screen, ambient light conditions in the room, and the type of content being displayed.
Here are some general guidelines for projector brightness:
Low Brightness (Less than 1000 Lumens): These projectors are best suited for small, dark rooms or for presentations where a dimmed environment is desired. They may not be suitable for well-lit areas.
Medium Brightness (1000 to 3000 Lumens): These projectors are versatile and can work well in a variety of environments, from moderately lit rooms to darker spaces. They are often used for business presentations, classrooms, and home theaters.
High Brightness (3000 to 5000+ Lumens): High-brightness projectors are ideal for larger venues, well-lit rooms, outdoor projections, and situations where a very large image is needed. They are commonly used in auditoriums, conference rooms, trade shows, and outdoor events.
It's important to note that while a higher brightness level can be beneficial in certain situations, excessively high brightness might lead to decreased color accuracy and image quality. It's essential to strike a balance between brightness and image quality based on your specific needs.
When considering projector brightness, also keep in mind the following:
Screen Size: A larger screen may require a brighter projector to ensure the image remains clear and visible.
Ambient Light: The amount of ambient light in the room affects how well the projected image is perceived. Brighter environments require higher projector brightness.
Content Type: Different types of content, such as presentations, movies, or gaming, might have varying brightness requirements.
Projection Distance: The distance between the projector and the screen affects the brightness of the image. A longer distance may require a brighter projector.
When choosing a projector, be sure to review the manufacturer's specifications for brightness and consider your specific usage scenario to determine the appropriate level of brightness for your needs.
Note:-
"Lumens" and "ANSI Lumens" both refer to units of measurement for brightness, specifically the amount of light output from a light source, such as a projector or a light bulb. However, there is a distinction between these two terms.
Lumens: Lumens are a standard unit of measurement for the total amount of visible light emitted by a light source in all directions. It is a measure of the overall brightness of the light source. Lumens are used to quantify the light output of various devices, including projectors, light bulbs, flashlights, and more.
ANSI Lumens: ANSI Lumens specifically refer to a standardized method of measuring the brightness of a projector. ANSI stands for the American National Standards Institute, which developed a set of guidelines and procedures for measuring projector brightness uniformly. This ensures that brightness measurements are consistent and comparable across different projector models and manufacturers.
The ANSI lumens measurement takes into account various factors that can affect the perceived brightness of a projected image, including the color of the projected light, the uniformity of the image, and the projection distance. This standardization helps consumers make informed decisions when comparing projectors from different brands.
In summary, "lumens" is a general unit of measurement for brightness, while "ANSI lumens" is a specific standardized measurement used for projectors to provide consistent and reliable brightness information. When comparing projectors, paying attention to the ANSI lumens rating can help you better understand and compare the brightness capabilities of different projector models.
Cable gauge refers to the thickness or diameter of an electrical cable. It is an important factor in determining the cable's electrical conductivity, power handling capacity, and overall performance. The gauge of a cable is typically measured in American Wire Gauge (AWG), which is a standardized system used to classify the size of electrical conductors.
In the AWG system, a lower gauge number indicates a thicker cable. For example:
Here are some key points to understand about cable gauge:
Resistance: Thicker cables have lower electrical resistance, which means they can carry higher currents with less loss of energy as heat. This is especially important for applications where power is being transmitted over longer distances.
Power Handling: Thicker cables can handle higher power levels without getting too hot or suffering from voltage drop. This is crucial for applications like home theater systems, power tools, and high-power audio systems.
Distance: The length of the cable run also affects the choice of cable gauge. Longer cable runs generally require thicker cables to minimize voltage drop.
Flexibility: Thicker cables are often less flexible and more difficult to bend, which can be a consideration for installations in tight spaces.
Cost: Thicker cables tend to be more expensive due to the increased amount of metal used in their construction.
Applications: Cable gauge is important for various applications, including electrical wiring in homes, automotive wiring, audio and video cables, and power distribution.
When choosing a cable gauge for a specific application, it's important to consider the current requirements, voltage drop, and the distance the cable will need to travel. Using an inadequate cable gauge can result in poor performance, overheating, or even damage to connected devices.
For home and consumer applications, you might encounter cable gauges like 12 AWG, 14 AWG, or 16 AWG for power cords and audio/video cables. However, for more specialized or industrial applications, larger cable gauges might be used to handle higher power loads.
Consulting with a professional or referring to relevant guidelines and standards for specific applications can help you determine the appropriate cable gauge for your needs.
In the context of a turntable, a "cartridge" refers to the component that holds the stylus (needle) and is responsible for translating the grooves on a vinyl record into electrical signals that can be amplified and played through speakers. Cartridges come in different types, each with its own design, features, and sonic characteristics. Choosing the right cartridge type for your turntable setup depends on your preferences, budget, and the kind of audio experience you're seeking.
Here are some common types of turntable cartridges:
Moving Magnet (MM) Cartridges:
Moving Coil (MC) Cartridges:
High-Output MC Cartridges:
Moving Iron (MI) Cartridges:
Ceramic Cartridges:
Optical Cartridges:
Chromecast built-in is a technology developed by Google that allows you to wirelessly stream and cast content from your mobile device, tablet, or computer to a compatible television or audio device. It essentially turns your TV or speaker into a receiver for streaming content, allowing you to enjoy media from various streaming services and apps on a larger screen or through better speakers.
Here's how Chromecast built-in works:
Device Integration: Many modern TVs, audio systems, and speakers come with Chromecast built-in capabilities. This means they have the technology embedded into their hardware, allowing you to cast content without the need for an external Chromecast dongle.
Setup: To use Chromecast built-in, you need to connect your Chromecast-enabled device to the same Wi-Fi network as your mobile device or computer. This is typically done through the device's settings menu.
Casting Content: Once your devices are on the same network, you can cast content from compatible apps on your mobile device, tablet, or computer. This can include streaming services like Netflix, YouTube, Spotify, and more.
Control: When you cast content, your mobile device or computer acts as a remote control. You can play, pause, adjust volume, and even browse for new content without interrupting the playback.
Multi-Room Audio: If you have multiple Chromecast-enabled speakers or devices in your home, you can create groups and synchronize playback across different rooms for a seamless multi-room audio experience.
Chromecast built-in offers several benefits:
Ease of Use: Casting is usually as simple as tapping a cast button within a compatible app. There's no need to physically connect cables or deal with complex setups.
Compatibility: Many popular streaming apps support Chromecast built-in, making it a versatile solution for enjoying various types of media.
Access to Online Content: You can cast online videos, music, and even your own media files from your device to your TV or audio system.
Enhanced Audio: When casting to a compatible audio device, you can enjoy higher-quality sound than what your mobile device's speakers might offer.
Chromecast built-in is a convenient way to extend your entertainment experience to larger screens and better sound systems without the need for additional hardware. Just ensure that your devices are compatible with Chromecast built-in, and you'll be able to enjoy seamless content casting in your home.
Coaxial digital inputs are a type of connection found on audio and video equipment, such as audio receivers, soundbars, and home theater systems. These inputs are designed to carry digital audio signals using a coaxial cable. Coaxial digital inputs are commonly used for connecting devices that transmit digital audio, such as CD players, DVD players, Blu-ray players, gaming consoles, and some set-top boxes.
Here's how coaxial digital inputs work and some key points to know:
Digital Audio Transmission: Coaxial digital inputs transmit audio in a digital format, typically using a standard known as S/PDIF (Sony/Philips Digital Interface). This means that the audio signal remains in a digital state without being converted to analog until it reaches the destination device.
Cable Type: Coaxial digital inputs use a specific type of coaxial cable with RCA connectors. The cable has a central conductor surrounded by a layer of insulation and a metal shield. This design helps minimize electromagnetic interference and maintains the integrity of the digital signal.
Audio Quality: Coaxial digital inputs can carry high-quality digital audio signals, including formats like PCM (Pulse Code Modulation) and Dolby Digital.
Compatibility: Many audio and video devices support coaxial digital inputs and outputs. However, it's important to ensure that both the source device and the destination device have coaxial digital connectors.
Use Cases: Coaxial digital inputs are commonly used for connecting devices that do not have HDMI connections, especially older audio and video equipment. They can be used for sending audio from devices like DVD players, CD players, and gaming consoles to an audio receiver or sound system.
Cable Length: Like any cable connection, the length of the coaxial cable can impact signal quality. It's advisable to use high-quality cables and keep cable lengths as short as possible to minimize signal loss.
When connecting devices with coaxial digital outputs to devices with coaxial digital inputs, you will need a coaxial digital cable with appropriate connectors on each end.
It's worth noting that modern audio and video equipment often feature HDMI connections, which can carry both video and audio signals in a single cable. However, coaxial digital inputs remain relevant, especially for connecting legacy devices or for scenarios where HDMI is not available or practical.
Coaxial input and output (often abbreviated as "coax input/output" or simply "coaxial") refer to specific types of connectors and ports used for transmitting various types of signals, including audio, video, and data, through coaxial cables. Coaxial cables are designed with a central conductor, surrounded by insulation and a metal shield, which helps minimise interference and maintain signal integrity. Here's a closer look at coaxial input and output:
Coaxial Input: A coaxial input is a port or connector on a device designed to receive signals through a coaxial cable. The type of signal being received can vary based on the device and its intended use:
Audio: Coaxial inputs can be used to receive digital audio signals, often using the S/PDIF (Sony/Philips Digital Interface) standard. This is common for connecting devices like DVD players, gaming consoles, or audio interfaces to audio receivers or amplifiers.
Video: Coaxial inputs might be used to receive analog video signals, such as composite video. Older TVs and monitors often had coaxial inputs for connecting devices like VCRs or cable TV sources.
Data: Coaxial inputs can also be used for data transmission, such as cable-based broadband connections like cable internet.
Coaxial Output: A coaxial output is a port or connector on a device used to transmit signals through a coaxial cable:
Audio: Coaxial outputs can be used to send digital audio signals, similar to coaxial inputs. Devices like CD or DVD players might have coaxial outputs for connecting to audio receivers or other audio equipment.
Video: Coaxial outputs can transmit analog video signals. For example, VCRs could use coaxial outputs to send composite video signals to a TV.
Data: Coaxial outputs can also be used for data transmission, such as sending a signal from a cable TV or satellite receiver.
In both cases, coaxial connections are versatile and can carry different types of signals. However, it's important to use the appropriate cable and ensure compatibility between the devices being connected. Coaxial cables and connectors come in various standards and versions, and it's important to use the correct type for the specific application to maintain signal quality and integrity.
Component ports, often referred to as "component video ports" or simply "component ports," are a type of video connection found on many audio-visual devices. Component video is a method of transmitting high-quality video signals by splitting the video signal into three separate colour channels: red, green, and blue (RGB), along with separate sync signals.
Component video connections offer improved video quality over standard composite video connections, where all the video information is combined into a single signal. Component video is capable of transmitting higher resolutions and better colour accuracy, making it a popular choice for connecting devices that require high-quality video output.
The component video connection typically consists of three colour-coded RCA connectors:
Red (Pr/Pb): This connector carries the red portion of the video signal.
Green (Y): This connector carries the green portion of the video signal, as well as the luminance (brightness) information.
Blue (Pb/Cb): This connector carries the blue portion of the video signal.
In addition to these three connectors, component video cables may also include two additional connectors for sync signals:
Sync (Y): This connector carries the sync signals, which are used to synchronize the display of the different color components.
White (Audio L/R): Some component video cables include two additional connectors for left and right audio channels, allowing both video and audio to be transmitted through the same cable.
Component video ports are commonly found on various devices, including:
When connecting devices using component video, it's important to ensure that both the source device and the display device (TV or projector) have compatible component video ports. Additionally, since component video only carries video signals, separate audio connections (usually using RCA cables) are often required for complete audiovisual setups.
It's worth noting that while component video provides higher quality than composite video, it is not as capable as modern digital connections like HDMI for transmitting both high-definition video and audio through a single cable.
The term "Composite Ports" typically refers to a type of connection or port found on electronic devices, especially older ones like TVs, monitors, and gaming consoles. A composite port is used to transmit analog audio and video signals from one device to another. It combines multiple signals (usually video and audio) into a single cable.
Composite ports use a single cable with three connectors:
Yellow Connector: This is for the video signal. It carries the luminance (brightness) and chrominance (color) information combined into one signal.
Red and White Connectors: These are for the audio signals. The red connector is usually used for the right audio channel, and the white connector is for the left audio channel.
Composite ports are relatively lower in quality compared to newer connection standards like HDMI (which supports digital audio and video) and are limited in terms of the resolution and clarity they can provide. They were widely used before the proliferation of digital connections like HDMI and DisplayPort.
It's worth noting that as technology has progressed, composite ports have become less common on modern devices in favor of more advanced connection options. If you have a device with only composite ports and you're looking to connect it to a modern TV or monitor, you might need to use adapters or converters to bridge the gap between the older analog technology and the newer digital standards.
Contrast ratio is a measurement that describes the difference in brightness between the brightest white and the darkest black that a display can produce. It is often used to quantify the quality of a display's ability to render images with a wide range of brightness levels. Contrast ratio is an important factor in determining the quality and visual performance of monitors, TVs, projectors, and other display devices.
There are two main types of contrast ratio:
Static Contrast Ratio: This refers to the difference in luminance (brightness) between the brightest white and the darkest black that a display can simultaneously produce when displaying a static image. It is usually represented as a ratio, such as 1000:1. A higher static contrast ratio generally indicates better differentiation between light and dark areas, resulting in more vivid and lifelike images.
Dynamic Contrast Ratio: This ratio takes into account a display's ability to adjust its brightness dynamically based on the content being shown. It measures the difference between the brightest white and the darkest black that a display can achieve over time. Dynamic contrast ratio can be significantly higher than static contrast ratio because the display can adjust its brightness on the fly, enhancing the perceived contrast in certain situations. However, dynamic contrast ratio measurements can vary greatly depending on the display's settings and the content being shown.
When comparing contrast ratios between different displays, it's important to note that manufacturers may use different methods to measure and advertise these ratios, making direct comparisons somewhat challenging. Additionally, some marketing claims may exaggerate contrast ratio figures, so it's a good idea to consider other factors, such as colour accuracy, viewing angles, and resolution, when evaluating the overall quality of a display.
In general, a higher contrast ratio is desirable for better image quality, as it helps to distinguish details in dark and bright scenes. However, keep in mind that contrast ratio is just one aspect of display quality, and a high contrast ratio alone doesn't guarantee a superior viewing experience.
Crossover frequency, in the context of audio and sound systems, refers to the frequency at which a crossover network splits and directs different frequency ranges of audio signals to different speakers or drivers in a multi-speaker setup, such as a loudspeaker system or a subwoofer.
Crossover networks are used to ensure that each speaker or driver in a system is responsible for reproducing a specific frequency range that it can handle most effectively. This improves overall sound quality, prevents distortion, and provides a balanced and coherent audio experience.
There are typically two types of crossover frequencies:
Low-Pass Crossover Frequency: This is the frequency at which the crossover network directs low-frequency signals to a specific driver, such as a subwoofer. The low-pass crossover ensures that the subwoofer only reproduces deep bass frequencies and doesn't try to reproduce higher frequencies that it may not handle well.
High-Pass Crossover Frequency: This is the frequency at which the crossover network directs high-frequency signals to other drivers, such as tweeters. The high-pass crossover ensures that the tweeters or other small drivers only reproduce high-frequency sounds, avoiding distortion and overloading with low-frequency signals.
In a typical multi-way loudspeaker system, you might encounter crossover frequencies like:
The specific crossover frequencies used depend on the characteristics of the speakers, the room acoustics, and the desired sound balance.
Setting the right crossover frequencies is crucial to achieving a well-balanced and seamless audio experience across the different speakers in a system. It ensures that each driver is responsible for the frequencies it can handle best, contributing to clear, accurate, and distortion-free sound reproduction.
Dirac Live® Room Correction is a sophisticated audio technology and software solution designed to optimize the sound quality and performance of audio systems, especially in room environments with acoustic challenges. It is developed by Dirac Research, a Swedish company specialising in digital sound optimisation.
The primary goal of Dirac Live® Room Correction is to address the acoustic issues present in a room that can negatively impact the listening experience. These issues include room resonances, reflections, standing waves, and other anomalies that can distort the audio playback.
Key features and benefits of Dirac Live® Room Correction include:
Measurement and Analysis: Dirac Live® measures the acoustic characteristics of your room and audio system using a calibrated microphone. It analyses the frequency response, phase, and time domain characteristics to identify problematic areas.
Customised Correction Filters: Based on the measurements, Dirac Live® generates custom correction filters that are applied to the audio signal. These filters aim to flatten the frequency response and correct phase and time domain issues, resulting in improved clarity and accuracy of sound reproduction.
Multi-Point Correction: Dirac Live® supports multi-point measurement and correction, allowing you to take measurements at multiple listening positions in the room. This ensures a more balanced sound across different seating locations.
Speaker Correction: In addition to room correction, Dirac Live® can also correct the frequency and phase response of individual speakers in your system, compensating for their inherent characteristics.
User-Friendly Interface: The software provides a user-friendly interface for setting up and configuring the correction process. It allows you to visualise the measurements and see the effects of the correction in real time.
Integration with Various Audio Systems: Dirac Live® can be integrated into various audio products, including AV receivers, preamplifiers, soundbars, and more. It can be applied to both stereo and multi-channel audio setups.
Tailored Sound: Dirac Live® aims to provide a tailored and accurate sound experience that is adapted to your specific room's acoustics and your audio system's characteristics.
It's important to note that while Dirac Live® Room Correction can significantly improve audio quality and address room-related issues, it is not a substitute for proper room acoustic treatment. In cases where severe acoustic problems exist, a combination of Dirac Live® and physical room treatment may be necessary for optimal results.
Overall, Dirac Live® Room Correction is a powerful tool for audiophiles, home theatre enthusiasts, and professionals who seek to achieve the best possible audio quality in their listening environments.
DisplayPort (DP) is a digital display interface developed by the Video Electronics Standards Association (VESA) as a high-performance alternative to older display interfaces like VGA and DVI. DisplayPort is designed to transmit video and audio signals from a source device, such as a computer or graphics card, to a display device, such as a monitor, projector, or television.
DisplayPort offers several advantages over its predecessors, including:
High Bandwidth: DisplayPort provides high data transfer rates and supports high-resolution displays, including 4K, 5K, and even 8K resolutions. It can handle demanding graphics applications and video playback.
Multiple Monitors: DisplayPort supports daisy-chaining multiple monitors through a single cable connection, which simplifies cable management in multi-monitor setups.
Audio Support: DisplayPort can carry audio signals alongside video, eliminating the need for separate audio cables. It supports high-quality audio formats and can transmit multi-channel audio to compatible displays.
Versatility: DisplayPort adapters and converters are available to connect to various display standards, including HDMI, DVI, and VGA, making it compatible with a wide range of displays.
Hot Plugging: DisplayPort supports hot plugging, allowing you to connect or disconnect devices while the source and display are powered on.
Embedded Display Stream Compression (DSC): DisplayPort 1.4 and later versions incorporate DSC, which enables higher resolutions and refresh rates without sacrificing image quality.
Variable Refresh Rates: DisplayPort supports technologies like Adaptive Sync (FreeSync) and G-Sync, which allow the display's refresh rate to sync with the graphics card's output, reducing screen tearing and improving gaming performance.
There are several versions of DisplayPort, with each iteration introducing new features and capabilities. As of my knowledge cutoff in September 2021, the latest version is DisplayPort 2.0, which offers even higher bandwidth and enhanced performance.
DisplayPort is commonly found on a wide range of devices, including computers, laptops, monitors, graphics cards, docking stations, and more. It competes with other display interfaces like HDMI (High-Definition Multimedia Interface) and is often used in conjunction with or as an alternative to HDMI, especially in professional and gaming setups where high refresh rates and high resolutions are desired.
Dolby is a well-known audio technology company that has developed various audio processing and encoding technologies designed to enhance and improve the quality of sound in various entertainment and communication mediums. These technologies are widely used in theatres, home entertainment systems, mobile devices, and more. Here are some key Dolby sound technologies:
Dolby Digital (AC-3): Dolby Digital is a popular audio compression technology used for encoding multi-channel audio (5.1 or 7.1) in movies, TV shows, and DVDs. It provides high-quality audio while efficiently compressing data for storage and transmission. Dolby Digital is commonly used in home theatre systems.
Dolby TrueHD: Dolby TrueHD is a lossless audio codec used primarily for high-definition Blu-ray Discs and other media formats. It provides audio that is bit-for-bit identical to the original studio recording, ensuring high-fidelity sound.
Dolby Atmos: Dolby Atmos is an advanced audio technology that adds height or overhead channels to create an immersive three-dimensional audio experience. It's used in theatres and home theatres to provide a more realistic and enveloping sound environment. Dolby Atmos can create the sensation of sound coming from all around and even above the listener.
Dolby Vision: While not exclusively an audio technology, Dolby Vision is a high dynamic range (HDR) video technology that enhances the visual quality of content by expanding the range of colours and brightness. It often pairs with Dolby Atmos to create a more immersive audiovisual experience.
Dolby Surround and Pro Logic: These are earlier audio processing technologies used to create a simulated surround sound experience from stereo or mono sources. They were used in older home theatre systems.
Dolby Voice: Dolby Voice is a suite of audio conferencing technologies that aims to provide clear and natural audio quality in teleconferencing and video conferencing. It reduces background noise, echoes, and other audio artifacts to make communication more effective.
Dolby Headphone and Dolby Virtual Speaker: These technologies are designed to create a virtual surround sound experience when listening through headphones or two-channel speaker systems.
Dolby Mobile and Dolby Digital Plus: These technologies are designed for mobile devices, improving audio quality and optimising sound for small speakers and headphones.
Dolby technologies are often found in products like home theatre systems, soundbars, headphones, mobile devices, movie theatres, and more. They have become synonymous with high-quality audio experiences and are widely used in the entertainment industry to create immersive and engaging soundscapes.
DTS (Digital Theatre Systems) is a company that specialises in developing advanced audio technologies aimed at enhancing sound quality and creating immersive audio experiences across various entertainment platforms. DTS technologies are commonly used in home theatres, cinemas, gaming, streaming services, and other audio-related applications. Some key DTS audio technologies include:
DTS:X: DTS:X is an object-based audio technology designed to create three-dimensional soundscapes. It allows sound to move freely around the listener in a three-dimensional space, including overhead, for a more immersive and lifelike audio experience. DTS:X is often used in home theatre systems and cinemas.
DTS-HD Master Audio: This technology is used for high-definition audio encoding, typically found on Blu-ray discs and other high-quality media. It provides lossless audio compression, preserving the original studio sound quality for a rich and dynamic audio experience.
DTS Neural:X: DTS Neural:X is an audio upmixing technology that enhances the listening experience by converting stereo or multichannel content into immersive audio formats. It can create a sense of height and spatial dimension even from standard audio sources.
DTS Virtual:X: DTS Virtual:X is an audio processing technology that simulates height and surround sound effects without requiring physical height or surround speakers. It's designed to enhance the audio experience for soundbars and other compact speaker setups.
DTS-HD High-Resolution Audio: This technology delivers high-quality audio with higher bit rates and sampling frequencies than standard-definition audio formats, resulting in improved audio clarity and detail.
DTS Sound Unbound: DTS Sound Unbound is a platform that supports advanced audio technologies like DTS:X and DTS Headphone:X for immersive 3D audio experiences in gaming and entertainment.
DTS Play-Fi: As mentioned earlier, DTS Play-Fi is a wireless audio streaming platform that enables multi-room audio playback, allowing users to enjoy synchronised audio across compatible devices throughout their home.
DTS Connect: DTS Connect is a technology used to encode and transmit multi-channel audio from a computer to external audio equipment, providing a high-quality audio experience for gaming, music, and movies.
These are just a few examples of DTS technologies. DTS continually innovates and develops new audio technologies to elevate the audio quality and realism in various entertainment experiences. Whether it's for home theatres, gaming, mobile devices, or other applications, DTS technologies aim to provide a more engaging and immersive audio environment.
DTS (Digital Theatre Systems) is a company that specialises in developing advanced audio technologies aimed at enhancing sound quality and creating immersive audio experiences across various entertainment platforms. DTS technologies are commonly used in home theatres, cinemas, gaming, streaming services, and other audio-related applications. Some key DTS audio technologies include:
DTS:X: DTS:X is an object-based audio technology designed to create three-dimensional soundscapes. It allows sound to move freely around the listener in a three-dimensional space, including overhead, for a more immersive and lifelike audio experience. DTS:X is often used in home theatre systems and cinemas.
DTS-HD Master Audio: This technology is used for high-definition audio encoding, typically found on Blu-ray discs and other high-quality media. It provides lossless audio compression, preserving the original studio sound quality for a rich and dynamic audio experience.
DTS Neural:X: DTS Neural:X is an audio upmixing technology that enhances the listening experience by converting stereo or multichannel content into immersive audio formats. It can create a sense of height and spatial dimension even from standard audio sources.
DTS Virtual:X: DTS Virtual:X is an audio processing technology that simulates height and surround sound effects without requiring physical height or surround speakers. It's designed to enhance the audio experience for soundbars and other compact speaker setups.
DTS-HD High-Resolution Audio: This technology delivers high-quality audio with higher bit rates and sampling frequencies than standard-definition audio formats, resulting in improved audio clarity and detail.
DTS Sound Unbound: DTS Sound Unbound is a platform that supports advanced audio technologies like DTS:X and DTS Headphone:X for immersive 3D audio experiences in gaming and entertainment.
DTS Play-Fi: As mentioned earlier, DTS Play-Fi is a wireless audio streaming platform that enables multi-room audio playback, allowing users to enjoy synchronised audio across compatible devices throughout their home.
DTS Connect: DTS Connect is a technology used to encode and transmit multi-channel audio from a computer to external audio equipment, providing a high-quality audio experience for gaming, music, and movies.
These are just a few examples of DTS technologies. DTS continually innovates and develops new audio technologies to elevate the audio quality and realism in various entertainment experiences. Whether it's for home theatres, gaming, mobile devices, or other applications, DTS technologies aim to provide a more engaging and immersive audio environment.
DTS (Digital Theatre Systems) is a company that specialises in developing advanced audio technologies aimed at enhancing sound quality and creating immersive audio experiences across various entertainment platforms. DTS technologies are commonly used in home theatres, cinemas, gaming, streaming services, and other audio-related applications. Some key DTS audio technologies include:
DTS:X: DTS:X is an object-based audio technology designed to create three-dimensional soundscapes. It allows sound to move freely around the listener in a three-dimensional space, including overhead, for a more immersive and lifelike audio experience. DTS:X is often used in home theatre systems and cinemas.
DTS-HD Master Audio: This technology is used for high-definition audio encoding, typically found on Blu-ray discs and other high-quality media. It provides lossless audio compression, preserving the original studio sound quality for a rich and dynamic audio experience.
DTS Neural:X: DTS Neural:X is an audio upmixing technology that enhances the listening experience by converting stereo or multichannel content into immersive audio formats. It can create a sense of height and spatial dimension even from standard audio sources.
DTS Virtual:X: DTS Virtual:X is an audio processing technology that simulates height and surround sound effects without requiring physical height or surround speakers. It's designed to enhance the audio experience for soundbars and other compact speaker setups.
DTS-HD High-Resolution Audio: This technology delivers high-quality audio with higher bit rates and sampling frequencies than standard-definition audio formats, resulting in improved audio clarity and detail.
DTS Sound Unbound: DTS Sound Unbound is a platform that supports advanced audio technologies like DTS:X and DTS Headphone:X for immersive 3D audio experiences in gaming and entertainment.
DTS Play-Fi: As mentioned earlier, DTS Play-Fi is a wireless audio streaming platform that enables multi-room audio playback, allowing users to enjoy synchronised audio across compatible devices throughout their home.
DTS Connect: DTS Connect is a technology used to encode and transmit multi-channel audio from a computer to external audio equipment, providing a high-quality audio experience for gaming, music, and movies.
These are just a few examples of DTS technologies. DTS continually innovates and develops new audio technologies to elevate the audio quality and realism in various entertainment experiences. Whether it's for home theatres, gaming, mobile devices, or other applications, DTS technologies aim to provide a more engaging and immersive audio environment.
DVI-D (Digital Visual Interface - Digital) is a video display interface used to connect video sources, such as computers or DVD players, to displays, such as monitors, projectors, or TVs. The "D" in DVI-D indicates that it carries only digital video signals, unlike the DVI-A variant which carries analog signals.
DVI-D comes in several formats, each with its own features:
DVI-D Single Link: This version of DVI-D supports a maximum resolution of 1920x1200 (WUXGA) at 60Hz. It has fewer pins and is commonly used for connecting computer monitors.
DVI-D Dual Link: DVI-D Dual Link offers higher bandwidth and supports resolutions up to 2560x1600 (WQXGA) at 60Hz or 1920x1080 (Full HD) at higher refresh rates. It has more pins to transmit the extra data needed for higher resolutions and refresh rates.
DVI-D is a digital interface, which means it provides a direct and pure digital connection between the source and the display, resulting in better image quality compared to analog connections like VGA. However, DVI-D does not carry audio signals, so a separate cable is needed for audio if the source device supports it.
It's worth noting that DVI is gradually being replaced by newer video interfaces like HDMI (which includes both video and audio signals) and DisplayPort (which offers even higher resolutions and additional features). If you have a device with a DVI-D input and you want to connect it to a device with HDMI or DisplayPort output, you may need to use an appropriate adapter or converter to bridge the connection between different interface types.
Speaker enclosure types refer to the design and construction of the cabinet or housing that holds the speaker drivers and other components. The enclosure plays a critical role in shaping the sound produced by the speakers by controlling factors such as bass response, overall sound quality, and efficiency. Different enclosure types are designed to achieve specific acoustic characteristics. Here are some common speaker enclosure types:
Sealed (Acoustic Suspension) Enclosure:
Ported (Bass Reflex) Enclosure:
Passive Radiator Enclosure:
Bandpass Enclosure:
Transmission Line Enclosure:
Horn Enclosure:
The choice of enclosure type depends on factors such as the type of speaker driver, desired bass response, room size, and intended use. Speaker manufacturers select enclosure types based on the characteristics they want to achieve in their products, and each type has its own advantages and trade-offs.
FlareConnect is a wireless multi-room audio streaming and control technology developed by Onkyo Corporation, a Japanese consumer electronics company known for its audio equipment. FlareConnect allows users to create a synchronised and flexible audio ecosystem, enabling them to play and control music across multiple rooms and devices within their home.
Key features of FlareConnect include:
Multi-Room Audio: FlareConnect enables users to stream audio content to compatible devices in different rooms, creating a seamless and synchronised multi-room audio experience.
Flexible Source Options: Users can choose from various sources to play music, including streaming services, network-attached storage (NAS), CDs, vinyl records, and more.
Easy Control: FlareConnect is typically controlled through a dedicated mobile app. Users can select rooms, choose sources, adjust volume, and manage playback from their smartphone or tablet.
High-Quality Audio: FlareConnect supports high-resolution audio formats, allowing users to enjoy superior audio quality.
Speaker Groups: Users can create speaker groups to play the same audio content on multiple devices simultaneously.
Integration with Other Technologies: FlareConnect can be integrated with other audio and home theatre technologies, such as Onkyo AV receivers, soundbars, and speakers.
Compatibility: FlareConnect is designed to work with a range of Onkyo and Pioneer audio products, ensuring compatibility and easy integration within your audio setup.
It's important to note that FlareConnect is specific to Onkyo and Pioneer audio equipment. While it offers similar multi-room audio capabilities as other wireless audio streaming platforms like Sonos, Yamaha MusicCast, and DTS Play-Fi, FlareConnect is primarily associated with the Onkyo and Pioneer brands.
If you're interested in setting up a multi-room audio system using FlareConnect, you would need to ensure that you have compatible Onkyo or Pioneer audio devices and download the associated FlareConnect app to control the system.
Frequency response is a measure of how well an audio device (such as a speaker, headphone, microphone, or amplifier) reproduces sound across a range of frequencies. It is a crucial factor in determining the overall audio quality and the ability of a device to accurately reproduce different pitches and tones in audio content.
Frequency response is usually represented graphically, with frequency (measured in Hertz, or Hz) on the x-axis and amplitude (usually measured in decibels, or dB) on the y-axis. The graph, known as a frequency response curve, shows how the device responds to different frequencies. The flatter the curve, the more neutral and accurate the frequency response.
Here are some key points to understand about frequency response:
Flat Frequency Response: An ideal audio device would have a completely flat frequency response curve, meaning it reproduces all frequencies equally accurately. In practical terms, achieving a perfectly flat response is challenging, but high-quality audio equipment aims to keep the response as flat and consistent as possible.
Bass and Treble Response: The frequency response curve helps visualise how well a device reproduces both low-frequency (bass) and high-frequency (treble) sounds. The bass and treble regions of the curve provide insights into the device's ability to handle deep lows and crisp highs.
Roll-Off and Extremes: A device's frequency response curve might show a gradual roll-off at very low or very high frequencies. This is natural and often a design choice to prevent distortion or strain at extreme ends of the frequency spectrum.
Measurement Standards: Frequency response measurements are typically conducted under controlled laboratory conditions using specialised equipment. It's important to consider whether the measurements were taken in an anechoic chamber (where reflections are minimised) or in a real-world environment, as this can affect the results.
Human Perception: While a flat frequency response is desirable, human perception of sound can vary. Some listeners might prefer a slight boost in bass or treble frequencies, known as "voicing," for a more pleasing or exciting sound.
Room Acoustics: It's important to note that the frequency response of an audio device can be influenced by the acoustics of the room in which it is placed. Room reflections, resonances, and other factors can affect how sound is perceived.
Comparing Devices: When comparing the frequency response of different audio devices, it's important to consider the context, the intended use, and your personal preferences. A device with a flat response might not always be the best choice if you're looking for a specific sound signature.
Frequency response is just one aspect of audio quality, and a device's performance should be evaluated in conjunction with other factors such as distortion, sensitivity, and soundstage. When choosing audio equipment, it's a good idea to listen to demonstrations whenever possible and read reviews from reputable sources.
HDMI ARC is a feature found in HDMI-equipped devices that allows for the bidirectional transmission of audio signals over a single HDMI cable. It simplifies audio connectivity between audio/video (AV) components such as TVs, soundbars, AV receivers, and other audio playback devices. Here's a glossary definition of HDMI ARC:
HDMI ARC (Audio Return Channel): HDMI ARC is a feature of HDMI (High-Definition Multimedia Interface) that enables audio to be sent from a television to an external audio device (such as a soundbar or AV receiver) without the need for a separate audio cable. When an HDMI ARC-compatible device is connected to an ARC-enabled HDMI port on a TV, the TV can send audio signals back to the external device, allowing for better audio quality and simplified setup.
Key points about HDMI ARC:
Two-Way Audio: HDMI ARC allows audio to flow in both directions—audio from the TV can be sent to an external audio device, and audio from external devices can be sent to the TV.
Simplified Setup: With HDMI ARC, there's no need for extra audio cables to connect the TV to an external audio system. A single HDMI cable can handle both video and audio signals.
Audio Formats: HDMI ARC supports a variety of audio formats, including standard stereo, Dolby Digital, DTS, and even some higher-quality formats like Dolby TrueHD and DTS-HD Master Audio, depending on the capabilities of the connected devices.
TV Control: Some HDMI ARC implementations also allow for TV remote control to be sent to the external audio device, enabling volume adjustment and other functions using a single remote.
Compatibility: To use HDMI ARC, both the TV and the external audio device need to have ARC support. Additionally, the HDMI cable being used must also be an ARC-compatible cable.
HDMI CEC: HDMI ARC often works in conjunction with HDMI CEC (Consumer Electronics Control), which allows devices to control each other over HDMI connections. This can include turning on/off devices and managing volume.
Variations: There are different HDMI ARC versions, and newer versions may offer additional features or improvements over earlier ones.
It's worth noting that while HDMI ARC is a convenient feature for sending audio from a TV to an external audio device, it may have limitations compared to more advanced audio technologies like HDMI eARC (enhanced Audio Return Channel), which supports higher audio quality and additional audio formats. When setting up a home theatre system or audio configuration, it's important to consider the compatibility and capabilities of the devices you're using to ensure the best audio experience.
HDMI (High-Definition Multimedia Interface) is a widely used audio and video interface that allows for the transmission of high-definition video, audio, and control signals between compatible devices. HDMI inputs and outputs are key components of this interface and play a central role in connecting and integrating various audiovisual equipment. Here's a breakdown of HDMI input and output:
HDMI Input: An HDMI input is a port or connection on a device that allows you to receive audio and video signals from an external source. Devices equipped with HDMI inputs can display content from sources such as:
Media Players: Blu-ray players, DVD players, streaming devices, and gaming consoles can be connected to HDMI inputs on TVs and monitors.
Set-Top Boxes: Cable boxes, satellite receivers, and digital TV boxes can output their content through HDMI to a display device.
Computers: Laptops, desktops, and other computing devices can connect to external monitors or TVs via HDMI inputs.
Cameras and Camcorders: Many modern cameras and camcorders have HDMI outputs for displaying their content on larger screens.
Audio Devices: Some audio devices can transmit both audio and video over HDMI, providing a convenient way to connect home theater systems or soundbars to displays.
HDMI inputs are typically labeled with numbers (HDMI 1, HDMI 2, etc.) or names (e.g., "Blu-ray," "Game Console") on the device or in the device's settings menu. Users can select the input source they want to display on the screen using the TV or display's remote control or on-screen menu.
HDMI Output: An HDMI output is a port or connection on a device that sends audio and video signals to an external display or monitor. Devices equipped with HDMI outputs include:
Computers: Laptops and desktops often have HDMI outputs for connecting to external monitors, projectors, or TVs.
Gaming Consoles: Video game consoles output their audio and video signals to a TV or monitor via HDMI.
Blu-ray Players and Media Players: These devices send audio and video to a TV or projector through HDMI.
AV Receivers: AV receivers can route multiple audio and video sources to a TV or display through their HDMI outputs.
Set-Top Boxes: Cable boxes, satellite receivers, and digital TV boxes use HDMI outputs to send audio and video to a TV.
Home Theater Systems: Many home theater systems use HDMI outputs to connect to displays and speakers.
HDMI outputs transmit both audio and video signals simultaneously. They can carry various audio formats, including surround sound and high-resolution audio, depending on the source and the capabilities of the connected display or audio system.
In summary, HDMI inputs and outputs are essential components of modern audiovisual setups, enabling seamless connectivity between different devices and allowing users to enjoy high-definition content on their displays while maintaining high-quality audio.
HDMI Standby Pass-through is a feature found on certain audio/video receivers (AVRs) and home theatre systems that allows the device to pass audio and video signals from HDMI source devices to a connected TV or display even when the AVR or home theatre system is in standby mode. This feature enables you to watch and listen to content from your HDMI sources without needing to power on the AVR or home theatre system.
Key points about HDMI Standby Pass-through:
Convenience: HDMI Standby Pass-through is convenient for scenarios where you want to watch TV or use a gaming console or other HDMI source without turning on the full audio system. It allows you to use the TV's built-in speakers for audio.
Energy Saving: Since you don't need to power on the entire AVR or home theatre system, HDMI Standby Pass-through can help save energy when you're only using the TV's audio and video.
Compatibility: Not all AVRs and home theatre systems support HDMI Standby Pass-through, so it's important to check the specifications of your device to see if this feature is available.
Configuration: In order to use HDMI Standby Pass-through, you may need to configure the settings on your AVR or home theatre system. This may involve enabling the pass-through feature in the device's menu or settings.
Control: Some AVRs and home theater systems with HDMI Standby Pass-through also allow you to control basic functions of the connected HDMI source devices (e.g., changing inputs, adjusting volume) using the AVR's remote control, even when the AVR is in standby mode.
Limitations: While HDMI Standby Pass-through allows video and audio signals to pass to the TV, more advanced audio processing features of the AVR or home theater system may not be accessible in standby mode.
Audio Options: Keep in mind that when using HDMI Standby Pass-through, audio is usually played through the TV's speakers. If you want to use external speakers or a soundbar, you may need to power on the AVR or home theater system.
It's important to note that the availability and functionality of HDMI Standby Pass-through can vary depending on the specific model and brand of your audio/video receiver or home theater system. If you're interested in this feature, refer to the user manual or specifications of your device to determine if it's supported and how to set it up.
There are several types of headphones, each with its own design, features, and intended use. The choice of headphone type depends on factors such as comfort, sound quality, portability, and the specific activities for which you plan to use them. Here are some common headphone types:
Over-Ear Headphones (Circumaural): These headphones have ear cups that fully enclose the ears. They offer excellent sound quality, comfort for extended use, and effective noise isolation. Over-ear headphones are often used for critical listening, studio monitoring, and immersive gaming experiences.
On-Ear Headphones (Supra-aural): On-ear headphones rest on the ears without fully enclosing them. They are more compact and portable than over-ear headphones, but they may provide slightly less noise isolation and bass response. On-ear headphones are suitable for general listening and commuting.
In-Ear Monitors (IEMs): These are small headphones that fit directly into the ear canal. They offer good noise isolation and portability. IEMs are commonly used by musicians, audio professionals, and individuals who want a compact and discreet listening solution.
Earbuds: Earbuds are small headphones that sit loosely in the outer ear. They are often included with portable devices and offer basic sound quality and convenience. However, they may not provide a secure fit or optimal sound isolation.
Wireless Headphones: Wireless headphones use Bluetooth or other wireless technologies to connect to devices without the need for cables. They come in various styles, including over-ear, on-ear, and in-ear options. Wireless headphones are convenient for activities that require freedom of movement, such as workouts and commuting.
Noise-Canceling Headphones: These headphones feature active noise-canceling technology to reduce or eliminate ambient background noise. They are ideal for travel, noisy environments, and situations where you want to focus on your audio content.
Gaming Headsets: Gaming headsets are designed with features such as a built-in microphone, virtual surround sound, and ergonomic design for extended gaming sessions. They are popular among gamers and those who engage in online communication.
Studio Monitor Headphones: These headphones are designed for accurate audio reproduction and are commonly used by audio engineers and musicians for mixing and recording purposes.
Sports and Fitness Headphones: These headphones are designed to stay securely in place during physical activities. They are often sweat-resistant and offer features tailored for workouts and outdoor activities.
Open-Back and Closed-Back Headphones: Some over-ear headphones have open-back or closed-back designs. Open-back headphones allow some sound leakage and offer a more natural soundstage, while closed-back headphones provide better isolation and a more focused sound.
When choosing headphones, consider your preferences for sound quality, comfort, noise isolation, portability, and any specific activities you'll be using them for. Keep in mind that different headphone models within each type can vary in terms of sound signature, build quality, and additional features.
Hi-Res Audio (High-Resolution Audio) is a term used to describe audio formats that provide higher quality and more detailed sound compared to standard audio formats. Hi-Res Audio support in headphones, audio players, and other devices has gained popularity among audiophiles and music enthusiasts who seek a more accurate and immersive listening experience. Here's an overview of Hi-Res Audio and its support in different devices:
Hi-Res Audio: Hi-Res Audio refers to audio formats that offer higher resolution, often exceeding the audio quality of standard CD-quality audio (16-bit/44.1kHz). Hi-Res Audio formats can include:
FLAC (Free Lossless Audio Codec): FLAC is a lossless audio format that retains the original audio quality while compressing file sizes. It supports high bit depths (up to 24 bits) and sampling rates (up to 192kHz or higher).
ALAC (Apple Lossless Audio Codec): ALAC is Apple's lossless audio format, similar to FLAC, and supports high-resolution audio.
DSD (Direct Stream Digital): DSD is a high-resolution audio format known for its unique one-bit audio stream. It's favoured by some audiophiles for its perceived natural sound.
WAV (Waveform Audio File Format): WAV is an uncompressed audio format that can support high bit depths and sampling rates, making it suitable for Hi-Res Audio.
AIFF (Audio Interchange File Format): AIFF is another uncompressed audio format that supports high-quality audio, often used by Apple devices and software.
Hi-Res Audio Support in Devices: Many modern audio devices offer Hi-Res Audio support to provide users with a superior audio experience:
Headphones: Hi-Res Audio headphones are designed to reproduce high-quality audio and are often optimised for accurate sound reproduction.
Digital Audio Players (DAPs): DAPs are portable music players that can support a variety of Hi-Res Audio formats. They provide a dedicated platform for high-quality audio playback on the go.
Smartphones: Some smartphones support Hi-Res Audio playback, either through their built-in hardware or third-party apps. These devices may feature higher-quality audio components, such as advanced digital-to-analog converters (DACs).
Audio Receivers and Amplifiers: Hi-Res Audio support in receivers and amplifiers ensures that high-quality audio is maintained throughout the audio chain.
Computers: Many computers and laptops support Hi-Res Audio playback through compatible media players and digital audio interfaces.
Music Streaming Services: Some music streaming services offer Hi-Res Audio streaming options, allowing users to access and enjoy high-quality audio content online.
It's important to note that to fully benefit from Hi-Res Audio, you need content that is recorded and encoded in these high-resolution formats. Additionally, the quality of your audio equipment, including headphones and speakers, can significantly impact your overall listening experience. When considering Hi-Res Audio support, ensure that your devices and content are compatible, and be prepared to invest in quality audio equipment to appreciate the enhanced sound quality.
Horizontal lens shift is a feature found in some projectors that allows you to adjust the horizontal position of the projected image without physically moving the projector itself. This adjustment can be helpful when setting up a projector in a location where it's not directly aligned with the centre of the screen or projection surface. Horizontal lens shift provides greater flexibility in projector placement and helps ensure that the projected image is properly aligned and rectangular.
Key points about horizontal lens shift:
Adjusting Image Position: Horizontal lens shift allows you to move the projected image horizontally to the left or right, while keeping the projector's position fixed. This is particularly useful when the projector cannot be placed directly in front of the screen due to obstacles, mounting constraints, or other considerations.
Maintaining Image Quality: When using digital keystone correction to adjust the image, there can be a loss of image quality due to the adjustment process. Horizontal lens shift, on the other hand, maintains the image's native resolution and sharpness.
Flexible Installation: Horizontal lens shift provides greater flexibility in projector placement, making it easier to achieve a centred and aligned image on the screen.
Multiple Lens Shift Controls: Some projectors offer both horizontal and vertical lens shift controls, allowing you to adjust the image in both directions for precise alignment.
Limitations: While horizontal lens shift is a valuable feature, the range of adjustment may be limited on certain projector models. It's important to check the specifications of the projector to ensure that the lens shift range meets your installation needs.
Professional Installations: Horizontal lens shift is particularly beneficial in professional installations, such as conference rooms, classrooms, home theatres, and commercial venues, where precise alignment is crucial for optimal viewing.
Projection Geometry: It's important to note that horizontal lens shift does not alter the basic projection geometry. It adjusts the position of the image on the screen but does not correct for distortions caused by uneven projection surfaces or other issues.
Horizontal lens shift is a valuable tool for achieving a properly aligned and visually pleasing projected image, especially in situations where the projector's placement is less than ideal. When setting up a projector, it's recommended to consult the projector's user manual and follow the manufacturer's guidelines for using the lens shift feature effectively.
IMAX Enhanced is a certification and licensing program developed by IMAX Corporation in collaboration with DTS (now part of Xperi Corporation) to deliver a premium home entertainment experience that closely replicates the audiovisual quality of IMAX's signature cinematic presentations. The IMAX Enhanced program focuses on enhancing the quality of audio and video content for compatible playback devices, such as televisions, projectors, and audio systems.
Key features and components of IMAX Enhanced include:
Higher-Quality Video: IMAX Enhanced content is mastered to achieve superior video quality, including high dynamic range (HDR) and wide colour gamut (WCG) for more vibrant and lifelike visuals.
Immersive Audio: IMAX Enhanced content features immersive audio formats such as DTS:X and DTS-HD Master Audio, designed to provide a three-dimensional and engaging sound experience.
Enhanced Picture Modes: IMAX Enhanced-certified displays often include specialised picture modes optimised for IMAX content playback. These modes are designed to closely match the cinematic intent of IMAX presentations.
Digital Remastering: IMAX Enhanced content undergoes a process of digital remastering and optimisation to ensure that it maintains the filmmaker's creative vision while taking advantage of the capabilities of modern home entertainment systems.
IMAX Mode: Some audio/video receivers and processors with IMAX Enhanced support offer an "IMAX Mode," which aims to replicate the sound characteristics of an IMAX theatre, providing a more immersive listening experience.
Certification Program: Devices bearing the IMAX Enhanced logo have undergone testing and meet certain standards set by IMAX and DTS. This ensures that the devices can accurately reproduce IMAX Enhanced content.
It's important to note that IMAX Enhanced content is not the same as IMAX theatrical releases. While IMAX Enhanced aims to provide a premium home entertainment experience, it does not replicate the massive screen size and unique projection technologies of IMAX theatres. Instead, it focuses on optimising content for high-quality home viewing.
To enjoy IMAX Enhanced content, you'll need a compatible playback device, such as an IMAX Enhanced-certified television or audio system, as well as content that has been specifically remastered and certified for the IMAX Enhanced program. The availability of IMAX Enhanced content and devices may vary by region and manufacturer.
If you're interested in experiencing IMAX Enhanced, it's recommended to look for devices and content that carry the IMAX Enhanced logo and to check with manufacturers for the latest information on compatible products and offerings.
Input impedance is a key parameter in electronic circuits, particularly in the context of audio equipment and signal processing. It refers to the resistance that an input of a device presents to the source sending the signal. Input impedance plays a significant role in determining how well a device interfaces with the signal source and affects signal integrity, impedance matching, and overall performance.
Here's what you need to know about input impedance:
Impedance Matching: Input impedance is important for impedance matching, which involves ensuring that the output impedance of a signal source matches or is compatible with the input impedance of the receiving device. Impedance mismatch can lead to signal reflections, loss of signal power, and distortion.
Signal Loading: Input impedance affects how much the signal source is loaded or affected by the input circuit. A higher input impedance results in less loading and minimises the impact on the source signal. Conversely, a low input impedance can draw more current from the source and potentially alter the signal characteristics.
Voltage Division: In a voltage divider circuit, the input impedance interacts with the output impedance of the signal source to determine how the input voltage is divided between the two impedances.
Frequency Response: Input impedance can impact the frequency response of a circuit. If the input impedance varies with frequency, it can affect the way the circuit interacts with different signal frequencies.
Buffering: Sometimes, a device with a high input impedance is used as a buffer between a source and a load with different impedance characteristics. This helps to minimise the impact of impedance mismatch.
Microphone Preamps: Input impedance is particularly relevant in audio equipment such as microphone preamplifiers. The choice of input impedance can affect the way a microphone interacts with the preamp and influence the resulting sound quality.
Guitar Amplifiers: Input impedance is critical in guitar amplifiers as it affects the interaction between the guitar's pickups and the amplifier's input stage. Impedance mismatch can lead to loss of tone and dynamics.
Measuring Input Impedance: Input impedance is usually measured in ohms (Ω) and can vary depending on the specific device, circuit design, and the type of signal it's intended to receive.
When selecting and designing circuits, it's important to consider input impedance to ensure proper signal transfer, minimise distortion, and optimise the performance of the devices involved. Impedance matching and understanding the relationship between input and output impedances are key factors in achieving high-quality signal processing and accurate audio reproduction.
Input sensitivity, also known as sensitivity rating, is a specification used to describe how much input signal is required to produce a specified level of output from an audio device, such as an amplifier or a speaker. It is an important parameter to consider when matching different audio components to ensure proper signal levels and avoid issues like distortion or insufficient volume.
Here's what you need to know about input sensitivity:
Definition: Input sensitivity is typically expressed in decibels (dB) and indicates the level of input signal (usually voltage) required to produce a specific output level (often expressed in dB as well). It represents the efficiency of the device in converting the input signal into an amplified output signal.
Matching Components: Matching the input sensitivity of different audio components is important to ensure that the signals are compatible and that the system operates optimally. If the input sensitivity of an amplifier is much higher than that of the source device, it may result in over-amplification and distortion. If the sensitivity is too low, you might not get sufficient volume.
Amplifiers: In amplifiers, the input sensitivity is often specified as the level of input signal required to achieve a specific output power (e.g., 1 watt or full power). A higher sensitivity rating means the amplifier requires less input signal to reach a certain output level.
Sources: For source devices like CD players or media players, input sensitivity indicates the signal level they can provide to the next component in the chain. It helps you gauge whether the source can drive the amplifier or other devices effectively.
Speaker Matching: Input sensitivity is also relevant when matching speakers to amplifiers. If an amplifier's sensitivity is significantly different from a speaker's sensitivity, it can lead to imbalanced sound levels and affect the overall sound quality.
Impedance Consideration: Input sensitivity can interact with input impedance. Higher input impedance requires less input signal to achieve a specific output, and vice versa.
Volume Control: Input sensitivity can impact the setting of the volume control on your audio equipment. If you have mismatched sensitivities, you may need to adjust the volume levels accordingly.
Industry Standards: Manufacturers may specify input sensitivity differently, so it's important to understand the measurement methods and standards used for comparison.
When setting up an audio system, it's important to consider input sensitivity along with other factors such as impedance matching, output power, and overall system requirements. Properly matching input sensitivities helps ensure efficient signal flow, optimal performance, and a balanced and accurate audio experience.
IR (Infrared) input and output refer to the capability of electronic devices to send and receive infrared signals for communication and control purposes. Infrared technology is commonly used in remote controls, home automation systems, and various other applications to transmit data wirelessly using infrared light.
Here's an explanation of IR input and output:
IR Input: IR input refers to the ability of a device to receive and interpret incoming infrared signals. When a device has IR input, it can understand commands or data sent by an external IR source, such as a remote control or another transmitting device. Some examples of devices with IR input include:
Television (TV): TVs often have IR input to accept commands from remote controls for tasks like changing channels, adjusting volume, and navigating menus.
Audio Systems: AV receivers, soundbars, and speakers may have IR input to control playback, adjust audio settings, and switch inputs.
Set-Top Boxes: Cable boxes, satellite receivers, and streaming devices use IR input to respond to remote control commands.
Projectors: Projectors can have IR input to enable remote control of functions such as power on/off and input selection.
Home Automation Devices: Smart home devices, such as smart thermostats, lighting systems, and home automation hubs, might use IR input to integrate with universal remote controls or central control systems.
IR Output: IR output refers to the ability of a device to emit infrared signals for communication with other devices or systems. When a device has IR output, it can transmit commands or data using infrared light that can be received and interpreted by compatible IR-receiving devices. Examples of devices with IR output include:
Universal Remote Controls: Universal remote controls often have IR output capabilities to transmit commands to a wide range of devices, allowing users to control multiple devices with a single remote.
Home Automation Hubs: Home automation hubs can use IR output to control entertainment devices, lighting, and other smart home devices as part of an integrated setup.
IR Extenders: IR extenders are devices that receive IR signals from a remote control and then transmit them to other devices located out of direct line of sight, effectively extending the range of the remote control.
Projectors and Screens: Some projectors and projection screens have IR output to synchronize functions like screen control with the projector's operation.
IR Blasters: IR blasters are accessories that provide IR output capabilities to devices that don't have built-in IR transmitters, allowing them to send IR commands.
IR technology offers a convenient way to wirelessly control and communicate with devices over short distances. It's widely used in homes, offices, entertainment systems, and other settings for tasks such as remote control, automation, and synchronization.
Keystone correction is a feature found in many projectors that allows you to adjust the shape of the projected image to correct for distortion caused by the projector's angle relative to the screen. When a projector is not perfectly aligned with the center of the screen, the resulting image may appear trapezoidal or distorted. Keystone correction helps to rectify this distortion and produce a more rectangular and properly proportioned image.
Key points about keystone correction:
Types of Keystone Correction:
Manual vs. Automatic Correction:
Limitations: While keystone correction is useful for minor adjustments, excessive correction can lead to reduced image sharpness and clarity. Whenever possible, it's best to position the projector at the correct angle to the screen to minimise the need for keystone correction.
Digital vs. Optical Correction: Keystone correction can be achieved through digital processing or optical adjustments in the projector's lens system. Optical keystone correction is often preferred, as it maintains image quality better than digital correction.
Application: Keystone correction is particularly useful in situations where you need to quickly set up a projector in a location where achieving perfect alignment is difficult. It's commonly used in presentations, classrooms, and temporary setups.
Other Image Adjustments: Some projectors also offer additional image adjustments, such as corner correction or warp adjustment, which allow for more precise correction of irregular screen shapes or complex projection setups.
Throw Ratio Consideration: The throw ratio of a projector (the distance from the projector to the screen relative to the screen width) can affect the degree of keystone correction needed. Lower throw ratios often result in more severe keystone distortion.
While keystone correction is a handy feature, it's important to note that it's best used for small adjustments. For optimal image quality, it's recommended to position the projector as close to the correct angle as possible and use keystone correction sparingly.
Lamp life expectancy is a crucial specification to consider when purchasing a projector. It indicates the estimated number of hours that the projector lamp is expected to operate before it needs replacement. Here are some key points to understand about lamp life expectancy in projectors:
Measurement: Lamp life is typically measured in hours of use. The stated lamp life in projector specifications represents the number of hours the lamp is expected to operate before its brightness diminishes to a certain percentage of its original output or before it fails.
Rated Hours: Projector manufacturers often provide multiple lamp life ratings based on different operating modes. The most common modes are "Normal" (full brightness) and "Eco" (energy-saving) modes. Eco mode usually extends lamp life at the cost of slightly reduced brightness.
Brightness Degradation: As a lamp ages, its brightness gradually diminishes. This may lead to a decrease in the projector's overall image quality over time.
End of Life: When a lamp reaches the end of its rated life, it may still continue to operate, but its brightness will be significantly reduced. Manufacturers often recommend replacing the lamp at this point to maintain optimal image quality.
Lamp Replacement: Projector lamps are replaceable components. When a lamp needs replacement, it's important to use genuine replacement lamps recommended by the projector manufacturer to ensure compatibility and performance.
User-Replaceable Lamps: Some projectors have user-replaceable lamps, allowing users to change the lamp themselves. This can be convenient and cost-effective.
Professional Replacement: In some projectors, especially high-end models, lamp replacement may require professional installation due to the complexity of the process or to maintain warranty coverage.
Factors Affecting Lamp Life:
Usage Considerations: Consider your usage patterns when choosing a projector. If you plan to use the projector for extended periods or in environments where lamp replacement may be inconvenient, you might prefer a projector with longer lamp life.
Replacement Cost: Replacement lamp cost is an important consideration. Projector lamps can be a significant ongoing cost, especially for high-brightness models.
Projector lamp life expectancy is an essential factor to evaluate to ensure that you get the desired performance and longevity from your projector. Be sure to review the manufacturer's specifications and recommendations for lamp replacement to make an informed decision based on your usage requirements.
Main speaker terminals, also known as binding posts or speaker connectors, are the primary connectors on audio equipment, such as amplifiers and receivers, that provide a means to connect and power external speakers. These terminals are used to establish a secure electrical connection between the audio source and the speakers, allowing audio signals to be amplified and reproduced as sound.
Key points about main speaker terminals:
Types of Terminals:
Positive and Negative Terminals: Main speaker terminals are typically colour-coded for easy identification. Red is commonly used for the positive (+) terminal, and black or white is used for the negative (-) terminal. Proper polarity ensures accurate audio reproduction.
Wire Gauge: Speaker wire gauge refers to the thickness of the wire. Main speaker terminals are designed to accommodate various wire gauges, ranging from thin to thick. It's important to use the appropriate wire gauge for optimal performance.
Stripping and Connection: When using bare speaker wire, you need to strip the wire insulation and insert the exposed wire into the binding posts or spring clips. Banana plugs and spade connectors provide a convenient and secure way to connect without stripping the wire.
Amplifier and Speaker Compatibility: Ensure that the main speaker terminals on your amplifier or receiver match the type of connectors on your speakers. Some high-end equipment may feature advanced terminal designs or support multiple connector types.
Tightening and Secure Connection: When connecting, make sure the terminals are tightened properly to ensure a secure connection. Loose connections can lead to signal loss and affect sound quality.
Bi-Wiring and Bi-Amping: Some speakers have multiple sets of main speaker terminals for bi-wiring or bi-amping configurations. Bi-wiring uses separate wires for the low and high-frequency sections of a speaker, while bi-amping involves using separate amplifiers for these sections.
Speaker Impedance: Main speaker terminals need to support the impedance (resistance) of the speakers you're connecting. Impedance mismatch can affect amplifier performance.
Speaker Selector Switches: Some amplifiers and receivers have speaker selector switches that allow you to choose which speakers are active. Make sure the selector settings match your speaker setup.
Properly connecting your speakers to the main speaker terminals ensures optimal audio performance and prevents issues like signal loss or distortion. Follow the manufacturer's guidelines and specifications for your audio equipment and speakers to achieve the best sound quality.
In the context of projector screens, "material gain" refers to the reflective properties of the screen material used in projection setups. Material gain, often simply referred to as "gain," is a specification that indicates how effectively a projector screen reflects and directs light towards the audience.
Here's what you need to know about material gain in projector screens:
Definition: Material gain, or gain, is a measurement of how much brighter the image appears when projected onto a screen compared to projecting the same image onto a perfectly diffusing (matte white) reference surface.
Measurement: Gain is typically expressed as a numerical value, such as 1.0, 1.2, 1.5, and so on. A gain value of 1.0 indicates that the screen reflects light evenly in all directions (diffusing light equally). Higher gain values indicate that the screen reflects more light towards the audience in specific directions.
Directivity: A screen with higher gain will reflect more light in a narrower angle, resulting in a "hotspot" where the image is brightest when viewed from the centre and decreases in brightness as you move to the sides. Lower gain screens have a wider viewing angle with more even brightness across the viewing area.
Applications: Screens with higher gain are often used in environments where ambient light is a concern, such as conference rooms, classrooms, and venues with less light control. Screens with lower gain are typically used in dedicated home theatres where light control is optimised.
Trade-Offs: While higher gain screens can provide brighter images in environments with ambient light, they may sacrifice some viewing angle and colour accuracy compared to lower gain screens. Lower gain screens tend to offer a wider and more consistent viewing angle but might be less suitable for brighter environments.
Screen Materials: Projector screens are available in various materials, each with its own gain value. These materials may include matte white, high-contrast grey, and specialised materials designed for specific applications.
Considerations: When choosing a screen material, consider factors such as the ambient lighting conditions, projector brightness, viewing angle requirements, and colour accuracy preferences.
Home Theatre vs. Commercial: Home theatre enthusiasts often prioritise screens with lower gain for optimal colour accuracy and wider viewing angles. Commercial settings may benefit from screens with higher gain to combat ambient light.
It's important to select a projector screen with the appropriate gain for your specific needs and viewing conditions. Both high and low gain screens have their advantages and trade-offs, so understanding your environment and intended use is essential in making the right choice.
Mobile High-Definition Link (MHL) is a technology standard that allows mobile devices, such as smartphones and tablets, to connect to larger display screens, such as TVs or monitors, using a single cable. MHL enables users to mirror or extend their mobile device's screen onto a larger display and transmit high-definition audio and video content.
Key features and information about MHL:
Single Cable Connection: MHL uses a single cable to connect a mobile device to a display, typically using a micro-USB or USB Type-C connector on the mobile device's end and an HDMI connector on the display end.
Video and Audio: MHL supports high-definition video and audio transmission. Users can stream videos, display photos, play games, and use apps from their mobile device on a larger screen while maintaining high-quality audio and video.
Screen Mirroring and Extension: MHL allows users to mirror their mobile device's screen onto the connected display. This is useful for presentations, sharing content with others, or simply enjoying media on a larger screen. Some devices also support screen extension, effectively turning the larger display into an extended desktop.
Power Charging: MHL connections often provide power charging to the connected mobile device, allowing users to charge their devices while using them on the larger display.
Control via Remote: When using MHL to connect a mobile device to a TV, users can often control the device's interface using the TV's remote control. This adds convenience and ease of use.
Compatibility: Not all mobile devices support MHL. Both the mobile device and the display need to be MHL-compatible for the technology to work. Many newer smartphones and tablets support MHL, but it's important to check the device's specifications.
MHL Versions: MHL technology has gone through multiple versions, each offering improvements in terms of data transfer rates, resolution support, and other features. It's important to ensure compatibility between the MHL version supported by the mobile device and the capabilities of the display.
Use Cases: MHL can be used for a variety of purposes, including sharing content with a larger audience, gaming on a big screen, watching videos, and giving presentations without the need for additional adapters.
Adapters and Accessories: In cases where a display does not have a built-in MHL port, users can use MHL adapters or dongles to connect their mobile devices to HDMI-equipped displays.
Alternatives: While MHL is a convenient way to connect mobile devices to displays, other technologies like wireless screen mirroring (e.g., Miracast) and USB-C video output have also gained popularity.
MHL offers a convenient solution for users who want to enjoy their mobile device's content on a larger screen with high-quality audio and video. It's important to ensure that both the mobile device and the display support the appropriate version of MHL for optimal compatibility and performance.
A mid/bass driver, also known as a midrange or midwoofer driver, is a component found in many audio systems, particularly in loudspeakers and speaker enclosures. It is responsible for reproducing sound frequencies within the midrange and lower midrange frequencies, including both mid-frequencies and bass frequencies.
Key features and information about mid/bass drivers:
Frequency Range: Mid/bass drivers are designed to handle frequencies in the midrange and lower midrange portions of the audio spectrum. The specific frequency range they cover can vary, but it generally includes the range from around 100 Hz to 2 kHz or so.
Crossover Points: In a multi-driver speaker system (two-way, three-way, etc.), mid/bass drivers work in conjunction with other drivers such as tweeters and woofers. Crossover networks are used to separate the frequency bands, directing midrange frequencies to the mid/bass driver and other frequencies to the appropriate drivers.
Cone Material: The cone material of a mid/bass driver is an important factor in determining its performance characteristics. Common cone materials include paper, polypropylene, kevlar, and other composite materials. The choice of material affects the driver's stiffness, weight, and damping properties.
Voice Coil and Magnet Assembly: The voice coil and magnet assembly are crucial components of the mid/bass driver. When an electrical signal is applied to the voice coil, it moves within the magnetic field produced by the magnet assembly, causing the driver's diaphragm (cone) to move and produce sound.
Size and Design: Mid/bass drivers come in various sizes, typically ranging from around 4 inches to 8 inches in diameter. The size of the driver affects factors such as its frequency response, power handling, and dispersion characteristics.
Dispersion: The dispersion pattern of a mid/bass driver refers to how sound is radiated in different directions. This can influence the driver's placement within a speaker enclosure and its interaction with the listener.
Enclosure Considerations: The enclosure type (sealed, ported, etc.) and design play a significant role in optimising the performance of the mid/bass driver. The enclosure helps control factors like resonance, damping, and bass response.
Integration: Mid/bass drivers need to be seamlessly integrated with other drivers in the speaker system to ensure a smooth and coherent sound across the entire frequency spectrum.
Application: Mid/bass drivers are commonly used in various audio systems, including bookshelf speakers, floor-standing speakers, studio monitors, car audio systems, and more.
Critical Frequency Range: The midrange frequencies handled by mid/bass drivers are crucial for reproducing the human voice, many musical instruments, and other important sonic elements.
The performance of mid/bass drivers greatly influences the overall sound quality of a speaker system. Their ability to accurately reproduce midrange and lower midrange frequencies contributes to a balanced and realistic audio experience, making them a vital component in audio reproduction systems.
Midrange drivers come in various sizes, typically measured in inches. However, for reference, here is a general conversion of midrange driver sizes from inches to millimetres:
1 inch = 25.4 mm
Common midrange driver sizes in millimetres:
These are approximate conversions, and actual sizes may vary slightly depending on the manufacturer and specific product design. When choosing a midrange driver for your audio system, it's important to consider factors such as the speaker's intended application, overall system design, and desired sonic characteristics.
The performance of mid/bass drivers greatly influences the overall sound quality of a speaker system. Their ability to accurately reproduce midrange and lower midrange frequencies contributes to a balanced and realistic audio experience, making them a vital component in audio reproduction systems.
"Minimum impedance" refers to the lowest impedance value that a speaker or audio device will present to the amplifier or audio source within a specific frequency range. Impedance is a measure of the opposition to the flow of alternating current (AC) in an electrical circuit. In audio systems, impedance is usually measured in ohms (Ω).
Key points about minimum impedance:
Speaker Impedance: Most speakers have a nominal impedance rating, which is a standard or average impedance value typically provided by the manufacturer. Common nominal impedance values for speakers include 4 ohms, 6 ohms, and 8 ohms.
Minimum Impedance Variation: The impedance of a speaker is not constant across all frequencies. It can vary with frequency due to the speaker's design, driver configuration, and other factors. The minimum impedance value is usually specified within a certain frequency range, such as 20 Hz to 20 kHz.
Amplifier Compatibility: The minimum impedance of a speaker is an important consideration when matching it with an amplifier or receiver. Amplifiers are designed to work with specific impedance loads, and driving speakers with an impedance lower than the amplifier's recommended minimum can potentially strain the amplifier and affect performance.
Safe Operation: It's important to use speakers with an impedance that is compatible with the amplifier's minimum impedance rating. Operating a speaker with too low of an impedance can result in excessive heat generation, distortion, and even damage to the amplifier.
Crossover Networks: In multi-driver speaker systems (such as two-way or three-way speakers), crossover networks divide the audio signal and direct specific frequency ranges to the appropriate drivers. The crossover design also takes into account the impedance characteristics of the drivers.
Nominal vs. Minimum Impedance: The nominal impedance is usually higher than the minimum impedance. For example, a speaker with a nominal impedance of 8 ohms might have a minimum impedance of around 6 ohms within its specified frequency range.
Performance Considerations: Speakers with lower impedance values might require more current from the amplifier to achieve a certain volume level. Some amplifiers might handle lower impedance loads better than others.
Compatibility and Matching: When selecting speakers and amplifiers, it's important to ensure that their impedance ratings are compatible. For example, an amplifier rated for 8 ohms should ideally be paired with speakers that have a nominal impedance of 8 ohms or higher.
Understanding the minimum impedance of speakers and their compatibility with amplifiers helps ensure optimal performance and longevity of both components in an audio system. It's advisable to refer to the specifications provided by the manufacturer and consider consulting with audio professionals when selecting and setting up audio equipment.
Monitor Out (D-sub 15-pin)" refers to a type of video output connection commonly found on various electronic devices, particularly computers and audio-visual equipment. This output allows you to connect the device to an external display, such as a monitor, projector, or another display device that uses a D-sub 15-pin connector.
Key points about Monitor Out (D-sub 15-pin):
D-sub 15-pin Connector: The D-sub 15-pin connector, also known as a VGA (Video Graphics Array) connector, is a type of analog video connector that has been widely used for connecting displays to computers and other devices. It is characterized by its trapezoidal shape and 15 pins arranged in three rows.
Analog Video Signal: The D-sub 15-pin connection provides an analog video signal, primarily used for video display purposes. It does not carry audio signals or support higher-resolution digital video formats.
Resolution and Refresh Rate: The maximum resolution and refresh rate supported by a Monitor Out (D-sub 15-pin) connection depend on the capabilities of the connected display device and the device's video output settings.
Applications: Monitor Out connections are commonly found on laptops, desktop computers, projectors, and certain audio-visual equipment. They allow you to extend or mirror your device's display onto an external monitor or projector.
Presentation and External Display: Monitor Out connections are often used for presentations, allowing you to connect a laptop or computer to a projector or larger display for showing slides, videos, or other content to a larger audience.
Video Adapters: If your device has a Monitor Out (D-sub 15-pin) connection and you need to connect it to a display with a different type of input (such as HDMI, DisplayPort, or DVI), you may need to use a video adapter or converter cable to ensure compatibility.
Legacy Technology: While D-sub 15-pin connections were once prevalent, they are considered legacy technology today. Modern computers and display devices often use digital connections like HDMI, DisplayPort, and USB-C for higher-quality digital video transmission.
Video Signal Quality: Analog connections like D-sub 15-pin can be susceptible to signal degradation over longer cable distances or in environments with electromagnetic interference. Digital connections offer better signal quality over longer distances.
It's important to note that as technology has evolved, D-sub 15-pin connections are being phased out in favor of digital connections that offer better video quality and higher resolutions. If you encounter a device with a Monitor Out (D-sub 15-pin) connection, make sure to check the capabilities of both the device and the display you intend to connect to.
A multi-channel analog input refers to a type of audio input that is capable of receiving multiple audio signals simultaneously, each representing a separate audio channel. This input is commonly used in audio equipment such as amplifiers, receivers, audio interfaces, and mixers to accommodate audio sources with multiple channels, such as surround sound systems, multi-track recordings, or multi-microphone setups.
Key points about multi-channel analog input:
Channels: A multi-channel analog input can support two or more separate audio channels. The number of channels may vary depending on the specific equipment and application. Common configurations include stereo (2 channels), 5.1 surround sound (6 channels), 7.1 surround sound (8 channels), and more.
Audio Sources: Multi-channel analog inputs are used to connect various audio sources that output multiple channels, such as DVD players, Blu-ray players, gaming consoles, multi-track recorders, and audio interfaces with multiple microphones.
Cabling: Multi-channel analog inputs are often provided as a set of individual connectors, each corresponding to a specific audio channel. For example, a 5.1 surround sound input might have six separate RCA or 3.5 mm jacks.
Surround Sound: Multi-channel analog inputs are essential for home theatre systems and surround sound setups, where audio content is mixed and played back through multiple speakers to create an immersive audio experience.
Recording and Mixing: In recording studios and professional audio setups, multi-channel analog inputs are used to capture and mix multiple audio sources separately, allowing for precise control and editing during the production process.
Compatibility: When connecting a source to a multi-channel analog input, it's important to ensure that the source's audio output matches the input's channel configuration. For example, a 5.1 surround sound output should be connected to a 5.1 multi-channel analog input.
Control and Adjustment: Devices with multi-channel analog inputs often provide controls for adjusting the volume, balance, and other audio settings for each individual channel. This allows users to fine-tune the audio playback to their preferences.
Audio Quality: Multi-channel analog inputs can provide high-quality audio reproduction, especially when used with high-resolution audio sources and capable audio equipment.
Advancements: While multi-channel analog inputs are still relevant, digital audio connections such as HDMI, DisplayPort, and optical audio (TOSLINK) have become more common for transmitting multi-channel audio signals in modern audio and video equipment.
Applications: Multi-channel analog inputs are used in a wide range of applications, including home theatre systems, professional audio recording studios, live sound setups, and more.
When setting up an audio system with multi-channel analog inputs, it's important to carefully consider the channel configuration, source compatibility, and the capabilities of your audio equipment to ensure optimal audio performance and functionality.
A multi-channel preamp output refers to a type of audio output found in audio equipment, particularly preamplifiers and AV receivers. This output is designed to provide multiple audio signals simultaneously, each representing a separate audio channel. Multi-channel preamp outputs are commonly used to connect audio signals to external amplifiers, processors, or powered speakers, allowing for more advanced audio setups and customisation.
Key points about multi-channel preamp outputs:
Channels: A multi-channel preamp output can provide two or more separate audio channels. The number of channels corresponds to the audio channels that the preamplifier or AV receiver can process and output. Common configurations include stereo (2 channels), 5.1 surround sound (6 channels), 7.1 surround sound (8 channels), and more.
Audio Signals: Multi-channel preamp outputs carry audio signals that have been processed and adjusted by the preamplifier or AV receiver. These signals can include various audio sources, such as music, movies, TV shows, and gaming content.
External Amplification: Multi-channel preamp outputs are often used to connect to external power amplifiers, which then drive the speakers. This allows for more power and control over the audio playback.
Surround Sound: Multi-channel preamp outputs are commonly used in home theatre setups to connect to a multi-channel power amplifier for driving surround sound speakers. Each channel corresponds to a specific speaker in the surround sound system.
Bi-amping and Tri-amping: In some audio setups, multi-channel preamp outputs can be used for bi-amping or tri-amping purposes. Bi-amping involves using separate amplifiers for different frequency ranges of a speaker, while tri-amping adds an additional amplifier for even more precise control over the audio signal.
Customisation and Flexibility: Multi-channel preamp outputs provide greater flexibility and customisation in audio setups. Users can choose different amplifiers or powered speakers for each channel, allowing for tailored sound reproduction.
Processor Loop: Some multi-channel preamp outputs include a processor loop, which allows users to insert external audio processors or equalisers into the signal path before sending the signal to the power amplifiers.
Calibration and Room Correction: Modern AV receivers with multi-channel preamp outputs often support room correction and calibration technologies that help optimise audio performance based on the acoustic characteristics of the room and the speaker setup.
Applications: Multi-channel preamp outputs are used in home theatre systems, high-end audio setups, professional audio environments, and any situation where advanced audio processing, amplification, and customisation are desired.
When setting up an audio system with multi-channel preamp outputs, it's important to ensure compatibility between the preamplifier or AV receiver, external amplifiers, and speakers. This will help you achieve optimal audio performance and take full advantage of the customisation options provided by the multi-channel preamp outputs.
Multi-room audio-video output refers to a system that enables the distribution of audio and video content from a single source to multiple rooms or zones within a building or property. This setup allows you to enjoy the same audio and video content in different areas simultaneously, providing a seamless entertainment experience throughout your home or commercial space.
Key points about multi-room audio-video output:
Content Distribution: Multi-room audio-video systems allow you to distribute audio and video signals from a central source, such as a media player, AV receiver, or streaming device, to various rooms or zones.
Source Devices: The central source device can include cable or satellite TV receivers, streaming devices, Blu-ray players, game consoles, and more. It's the device that generates the audio and video content to be distributed.
Zone or Room Selection: In a multi-room setup, you can choose which rooms or zones receive the audio and video signals. This allows you to have different content playing in different areas or the same content throughout the property.
Control and Management: Multi-room audio-video systems often come with dedicated control solutions, such as remote controls, smartphone apps, or touch panels, that allow you to select sources, adjust volume, and manage content distribution for each zone.
Audio Distribution: In addition to video, multi-room systems can distribute audio signals to different rooms or areas, allowing you to enjoy music throughout the property. This is especially popular for whole-home audio setups.
Wiring and Connectivity: Multi-room systems require proper wiring and connectivity infrastructure to transmit audio and video signals from the central source to various endpoints. This can include Ethernet cables, HDMI cables, and audio cables.
Audio-Video Receivers: AV receivers equipped with multi-zone capabilities are commonly used in multi-room setups. These receivers can process and amplify audio for different zones independently, allowing for different audio sources and volume levels.
Matrix Switchers: In larger installations, matrix switchers can be used to route audio and video signals to specific rooms or zones. These devices provide more advanced control over signal distribution.
Home Automation Integration: Multi-room audio-video systems can be integrated into larger home automation or smart home setups, allowing you to control entertainment, lighting, climate, and more through a centralised control interface.
Commercial Applications: Multi-room audio-video systems are also popular in commercial environments, such as restaurants, bars, hotels, and conference centres, where different zones require audio and video content distribution.
Content Synchronisation: Ensuring that audio and video content is synchronised across all zones is essential for a seamless user experience. Delays or synchronisation issues can be disruptive.
Speaker and Display Setup: Each room or zone requires appropriate speakers and displays to reproduce the audio and video content. The setup can range from simple in-ceiling speakers and wall-mounted displays to more elaborate home theatre configurations.
Multi-room audio-video systems provide convenience, flexibility, and enhanced entertainment options for both residential and commercial spaces. They allow you to create personalised and immersive audio-video experiences tailored to the preferences and needs of each room or zone.
Noise cancelling, also known as active noise cancellation (ANC), is a technology used in headphones, earphones, and other audio devices to reduce or eliminate unwanted ambient sounds from the environment. This technology employs microphones and advanced signal processing to generate anti-noise or inverse sound waves that cancel out incoming noises, providing a quieter and more immersive listening experience.
Key points about noise cancelling:
Microphones: Noise-canceling headphones have built-in microphones that pick up external sounds, such as background noise and ambient sounds.
Anti-Noise Generation: The incoming external sounds are analysed, and the headphones generate sound waves with the exact opposite phase (anti-noise) of the detected noise. When these anti-noise waves combine with the incoming noise, they effectively cancel each other out.
Active vs. Passive: Noise cancelling is different from passive noise isolation, which involves using physical barriers (e.g., closed ear cups) to block out external sounds. Active noise cancellation actively counters the noise using technology.
Frequency Range: Noise-cancelling technology is most effective at reducing constant, low-frequency sounds such as engine noise, air conditioning hum, or background chatter.
Effectiveness: Noise cancellation can significantly reduce ambient noise, making it particularly useful for travel, commuting, office environments, and other situations where noise reduction is desirable.
Types of Noise Cancelling:
Battery-Powered: Noise cancelling headphones require power to operate the microphones and processing circuitry. They usually use built-in rechargeable batteries.
Modes: Some headphones offer different noise-cancellation modes, such as adjustable levels of cancellation or the ability to let in ambient sounds for safety (e.g., hearing announcements at an airport).
Quality and Performance: The effectiveness of noise cancelling can vary between different models and brands of headphones. Premium models tend to offer more advanced noise cancellation technology and superior sound quality.
Sound Quality: Noise cancelling can affect sound quality, especially in cheaper models. However, modern ANC technology has significantly improved, and high-end models often provide excellent sound quality along with noise cancellation.
Limitations: Noise cancelling is most effective for continuous, low-frequency sounds. It may not completely eliminate all types of noises, such as sudden loud noises or high-frequency sounds.
Use Cases: Noise-cancelling headphones are popular for travellers, commuters, office workers, and anyone looking to enjoy their audio content without distractions from the surrounding environment.
Overall, noise cancelling technology enhances the listening experience by reducing unwanted background noise, allowing users to focus on their audio content without raising the volume excessively.
"Online audio services support" refers to the compatibility and integration of audio devices, such as speakers, headphones, and audio systems, with various online platforms and streaming services that provide music, podcasts, radio stations, and other audio content over the internet. This support enables users to access and enjoy a wide range of digital audio content through their devices.
Key points about online audio services support:
Streaming Platforms: Online audio services include popular streaming platforms like Spotify, Apple Music, Amazon Music, Tidal, Deezer, Pandora, YouTube Music, and more. These platforms offer vast libraries of music tracks, albums, playlists, podcasts, and radio stations.
Integration: Many audio devices are designed to integrate seamlessly with these online platforms. Integration can involve dedicated apps, voice assistants (e.g., Amazon Alexa, Google Assistant), or direct compatibility with the platform's APIs (Application Programming Interfaces).
Device Compatibility: Online audio services support can be found in a variety of devices, including smart speakers, wireless headphones, soundbars, AV receivers, and home audio systems.
Control and Interaction: Devices with online audio services support allow users to search for, select, and play specific songs, artists, albums, or playlists directly from the platform's app or through voice commands to the device.
Personalisation: Online services often offer personalised recommendations and playlists based on users' listening habits and preferences. This personalisation enhances the user's music discovery experience.
Multi-Room Audio: Many platforms and devices support multi-room audio, allowing users to synchronise and play the same audio content on multiple devices throughout their home.
Offline Listening: Some platforms offer offline listening modes, enabling users to download content for playback when an internet connection is unavailable.
Subscription Models: Online audio services typically offer both free and premium subscription models. Premium subscriptions often provide ad-free listening, offline downloads, higher audio quality, and additional features.
Cross-Platform Access: Users can often access online audio services from various devices, including smartphones, tablets, computers, smart TVs, and dedicated audio equipment.
Voice Control: Voice assistants integrated into devices enable hands-free control of online audio services. Users can request specific songs, playlists, genres, and more using voice commands.
Firmware Updates: Some devices receive firmware updates to add support for new online audio services and features, enhancing the user experience over time.
Geographic Availability: The availability of online audio services can vary by region, as some platforms may have licensing restrictions that limit access in certain countries.
Online audio services support is an important aspect of modern audio devices, providing users with convenient access to a vast array of audio content and enhancing the overall enjoyment of music, podcasts, and other audio entertainment. When choosing audio devices, it's advisable to check for compatibility with your preferred online audio services to ensure a seamless and integrated experience.
Optical digital inputs, often referred to as "Toslink" or "S/PDIF" inputs, are a type of audio input commonly found on audio equipment such as AV receivers, soundbars, home theatre systems, and digital-to-analog converters (DACs). These inputs allow you to connect optical audio sources, such as TVs, gaming consoles, Blu-ray players, and CD players, to your audio device for high-quality digital audio transmission.
Key points about optical digital inputs:
Optical Cable: Optical digital inputs use a specific type of cable known as an optical or Toslink cable. This cable transmits audio signals using light pulses, making it immune to electromagnetic interference and providing a high-quality digital audio connection.
Audio Transmission: Optical digital inputs transmit audio signals in a digital format, ensuring a clean and accurate audio transfer without the potential for analog interference.
Audio Formats: Optical inputs can support various digital audio formats, including stereo PCM (Pulse Code Modulation), Dolby Digital, DTS, and more, depending on the capabilities of the connected devices.
Home Theatre Systems: Optical inputs are commonly used in home theatre setups to connect sources like TVs, Blu-ray players, and gaming consoles to AV receivers. This allows for high-quality audio playback through the home theatre speakers.
Soundbars and Speakers: Soundbars often feature optical inputs, allowing you to connect your TV or other audio sources directly to the soundbar for improved audio quality. Some powered speakers and audio systems also include optical inputs.
DACs and Audio Interfaces: Digital-to-analog converters (DACs) and audio interfaces often have optical inputs to convert digital audio signals into analog audio for playback through headphones or speakers.
Simple Setup: Optical connections are easy to set up. You plug one end of the optical cable into the optical output of your source device and the other end into the optical input of your audio device.
Dolby Digital and DTS: Optical connections are commonly used for transmitting Dolby Digital and DTS surround sound formats, making them ideal for home theatre applications.
Limitations: While optical connections provide high-quality audio transmission, they have some limitations compared to HDMI connections. For instance, they may not support certain advanced audio formats like Dolby Atmos.
Device Compatibility: When using optical digital inputs, it's important to ensure that both the source device (e.g., TV, Blu-ray player) and the destination device (e.g., AV receiver, soundbar) support the same audio formats and capabilities.
Signal Loss: Very long optical cables might experience signal loss due to the attenuation of the light pulses over distance.
Optical digital inputs offer a convenient and reliable way to connect your audio sources to compatible audio devices for high-quality digital audio transmission. They are particularly popular in home theatre setups and with devices that lack HDMI or other digital audio connections.
Optical inputs and outputs, commonly referred to as "Toslink" or "S/PDIF" inputs/outputs, are digital audio connections used to transmit high-quality audio signals between audio devices. These connections use optical cables to transfer audio data using light pulses, ensuring clean and interference-free transmission.
Here's a closer look at optical inputs and outputs:
Optical Inputs:
Audio Sources: Optical inputs are found on a variety of audio devices, including AV receivers, soundbars, home theatre systems, DACs, gaming consoles, DVD players, Blu-ray players, and more.
Audio Transmission: They allow you to connect compatible audio sources to your device for playback. The optical cable transfers digital audio signals in the form of light pulses, maintaining signal integrity and reducing the risk of electrical interference.
Audio Formats: Optical inputs support various audio formats, including stereo PCM (Pulse Code Modulation), Dolby Digital, DTS, and other surround sound formats, depending on the connected devices' capabilities.
Home Theatre Setup: Optical inputs are commonly used in home theatre systems to connect audio sources like TVs, gaming consoles, and Blu-ray players to AV receivers or soundbars. This enables high-quality audio playback through the home theatre speakers.
Setup: To use an optical input, you need an optical cable with a compatible connector on each end. Plug one end into the optical output of your source device and the other end into the optical input of your audio device.
Signal Loss: Very long optical cables might experience signal loss due to the attenuation of the light pulses over distance.
Optical Outputs:
Audio Devices: Devices equipped with optical outputs include TVs, AV receivers, DVD players, Blu-ray players, gaming consoles, and audio interfaces.
Audio Transmission: Optical outputs allow you to send audio from your device to another audio device or speaker system. For example, you can connect a TV to an AV receiver using an optical cable to transmit audio from the TV to the receiver.
Sound Quality: Optical outputs provide high-quality digital audio transmission, ensuring that the audio signal remains accurate and free from analog interference.
Dolby Digital and DTS: Optical outputs are commonly used for transmitting surround sound formats like Dolby Digital and DTS from devices to AV receivers or sound systems.
Device Compatibility: When using optical outputs, ensure that both the source device and the destination device (e.g., AV receiver, soundbar, speakers) support the same audio formats and capabilities.
Use Cases: Optical outputs are beneficial for sending audio signals to devices that lack HDMI inputs, such as older AV receivers or audio systems.
Both optical inputs and outputs provide a reliable and efficient way to transmit digital audio signals between compatible devices. They are particularly useful in home theatre setups and audio systems where high-quality audio transmission is a priority. When setting up your audio equipment, consider the availability of optical inputs and outputs and their compatibility with your devices' audio formats.
Phase control, in the context of audio and sound reproduction, refers to the adjustment or manipulation of the phase relationship between audio signals. Phase is a critical aspect of audio, especially in multi-speaker setups or when dealing with audio signals from different sources. Proper phase control ensures that the audio signals from different speakers or sources align correctly, resulting in clear and accurate sound reproduction.
Key points about phase control in audio:
Phase and Time Alignment: In audio, phase refers to the relationship in time between two or more sound waves. When sound waves are in phase, their peaks and troughs align, resulting in constructive interference and reinforcing the sound. When they are out of phase, they can cancel each other out, causing destructive interference and affecting sound quality.
Speaker Alignment: In multi-speaker setups, such as home theatres or professional sound systems, phase control is important to ensure that sound waves from different speakers arrive at the listener's ears in sync. Misaligned phases can lead to "comb filtering" effects, where certain frequencies cancel out or become exaggerated.
Crossover Networks: In systems with multiple speakers (e.g., woofers, midrange drivers, tweeters), phase control is used in crossover networks to ensure that the different driver types work together cohesively and produce a seamless sound output.
Subwoofers: Phase control is often used when integrating subwoofers with main speakers. Adjusting the phase of the subwoofer helps achieve proper time alignment between the low-frequency sounds produced by the subwoofer and the higher-frequency sounds produced by the main speakers.
Time Delay: Phase control can involve adjusting time delays between audio signals to achieve proper alignment. Time delays are used to synchronise sound waves arriving at different positions, such as when setting up surround sound systems.
Bass Management: In home theatre systems, phase control is used in conjunction with bass management to ensure a seamless transition between the main speakers and the subwoofer.
Studio Recording: In recording studios, phase control is critical when using multiple microphones to capture different instruments. Improper phase alignment can result in phase cancellation or muddiness in the recorded sound.
Digital Signal Processing (DSP): Modern audio equipment, including AV receivers and sound processors, often incorporate DSP technology for precise phase control and alignment.
Calibration Systems: Some audio systems have automatic calibration systems that analyze the room acoustics and adjust phase and time alignment to optimise sound quality.
Manual Adjustment: In advanced setups, phase adjustments may be made manually using tools like phase meters or oscilloscopes to visualise and fine-tune the alignment of audio signals.
Proper phase control is crucial for achieving accurate and natural sound reproduction in various audio systems, whether it's a home theatre, music playback, recording studio, or live sound setup. It helps ensure that audio signals work together cohesively, minimising interference and delivering the best possible listening experience.
Power, in the context of audio and video systems, refers to the electrical energy needed to operate and drive various components within these systems. It plays a crucial role in determining the performance, volume, and overall quality of audio and video playback. The power requirements and considerations vary depending on the specific components and setups being used.
Here's how power is relevant in audio and video systems:
Audio Systems:
Amplifiers: Power amplifiers are responsible for increasing the amplitude of audio signals to drive speakers. The power output of an amplifier is typically measured in watts per channel (WPC). Higher-powered amplifiers can deliver louder and more dynamic audio, especially for large rooms or high-performance setups.
Speaker Power Handling: Speakers have power handling capabilities that indicate the maximum amount of power they can handle without distortion or damage. Matching the amplifier's power output to the speaker's power handling is important for optimal performance and longevity.
Efficiency and Distortion: Adequate power is essential to prevent underpowering, which can lead to distortion at higher volumes. Insufficient power can cause clipping and distortion, negatively impacting audio quality.
Subwoofers: Powered subwoofers require sufficient power to reproduce low-frequency sound accurately. Subwoofers often have their own built-in amplifiers to drive the dedicated low-frequency drivers.
Video Systems:
Display Devices: Video displays, such as TVs and projectors, require power to illuminate the screen and produce images. The power consumption of displays varies based on factors like screen size, technology (LCD, OLED, etc.), and brightness settings.
Projectors: High-powered projectors are needed for larger screens or brighter environments. Projector power is measured in lumens, indicating the brightness output.
AV Receivers: AV receivers act as central hubs for audio and video systems. They require power to process and amplify audio signals, as well as to handle video switching and processing tasks.
Media Players and Streaming Devices: Devices that play audio and video content, such as Blu-ray players, streaming devices, and gaming consoles, require power to operate and provide content to displays and audio systems.
Audio-Video Processors: Audio-video processors, often used in advanced home theatre setups, require power to handle complex audio decoding and video processing tasks.
Power Management: Efficient power management, including energy-saving modes and automatic power-off features, can help reduce energy consumption and extend the lifespan of components.
Power Distribution: Ensuring proper power distribution and surge protection is crucial to safeguarding equipment from power fluctuations, voltage spikes, and potential damage.
The power requirements for audio and video systems depend on the desired performance, room size, speaker sensitivity, and other factors. Adequate power ensures clean and accurate audio reproduction, clear video playback, and an overall enjoyable and immersive entertainment experience. When setting up audio and video systems, it's important to consider the power needs of each component and ensure proper power management for optimal performance and longevity.
Powered multi-room audio output refers to a system that allows you to distribute audio content from a central source to multiple rooms or zones within a building or property, using speakers that have built-in amplification (powered speakers). This setup enables you to enjoy synchronised audio playback in different areas, creating a seamless and immersive listening experience throughout your home or commercial space.
Key points about powered multi-room audio output:
Central Source: The system typically starts with a central audio source, which can be a media player, streaming device, AV receiver, or any other audio source that provides the content to be played.
Powered Speakers: In powered multi-room audio systems, the speakers in each room or zone have their own built-in amplifiers. This eliminates the need for separate external amplifiers or receivers in each room.
Distribution: Audio signals from the central source are distributed to the powered speakers in different rooms or zones. Each speaker receives its own audio feed and amplifies the signal to produce sound.
Synchronisation: Synchronised playback is essential to ensure that the audio is heard simultaneously in all rooms or zones. This requires a reliable network and system that can maintain proper timing.
Control: Many powered multi-room audio systems come with dedicated control solutions, such as smartphone apps or remote controls, that allow you to select sources, adjust volume, and manage playback for each room independently or collectively.
Multi-Zone Setup: The system can be configured with multiple zones, each with its own set of powered speakers. This allows you to play different audio content in different areas or the same content throughout the property.
Wired and Wireless Connectivity: Powered multi-room audio systems can use wired connections (e.g., Ethernet cables) or wireless technologies (e.g., Wi-Fi, Bluetooth) to transmit audio signals from the central source to the speakers.
Music Streaming: Many powered multi-room audio systems support streaming services, allowing you to access and play music from popular platforms like Spotify, Apple Music, or Tidal.
Expandability: These systems are often expandable, allowing you to add more powered speakers to additional rooms or zones as needed.
Customisation: Some systems offer advanced features like creating specific playlists for different zones, adjusting EQ settings for individual rooms, and setting up automation routines.
Commercial Applications: Powered multi-room audio systems are also popular in commercial settings, such as restaurants, cafes, retail stores, and offices, where background music or announcements need to be distributed to multiple areas.
Acoustic Considerations: Proper placement and speaker choice are important for achieving the desired sound quality and coverage in each room or zone.
Powered multi-room audio output systems provide convenience, flexibility, and enhanced audio experiences for both residential and commercial spaces. They allow you to create customised soundscapes and moods throughout your property, enhancing entertainment, relaxation, and productivity.
Preamp outputs, also known as preamp outputs or pre-out outputs, are connections found on audio equipment, particularly AV receivers, amplifiers, and some stereo components. These outputs are used to connect external amplifiers, subwoofers, or other audio devices to the main unit, allowing for greater flexibility and customisation in audio setups.
Key points about preamp outputs:
Signal Level: Preamp outputs provide a low-level audio signal, typically before it is amplified by the main amplifier section of the audio device. This signal is suitable for connecting to external power amplifiers, subwoofers, or other audio equipment.
Use Cases:
Flexibility: Preamp outputs offer flexibility by allowing you to customise your audio system according to your preferences, upgrade components over time, or achieve specific audio goals.
Volume Control: In some setups, preamp outputs may still be affected by the main unit's volume control, meaning changes in volume will affect the signal sent to external devices. This is common in home theatre systems where you want to control the overall volume for all speakers.
Connection Type: Preamp outputs are usually provided as RCA connectors (phono connectors) on the back of the audio device. Some high-end equipment might offer balanced XLR preamp outputs.
Adjustment and Setup: Some AV receivers and preamplifiers may allow you to configure the output level of the preamp outputs, ensuring proper balance with other components.
Bi-Directional Functionality: Some AV receivers and processors offer preamp outputs that can also serve as preamp inputs, allowing you to use the same connectors for both sending and receiving signals.
Crossover and EQ: Preamp outputs may include built-in crossovers and equalisation settings to optimise the signal for specific connected devices, such as subwoofers.
Preamp outputs are a valuable feature for audio enthusiasts and those seeking to create more advanced audio setups. They provide a way to expand, customise, and fine-tune audio systems by integrating external amplifiers, subwoofers, and other audio devices, ultimately enhancing sound quality and meeting specific audio preferences.
Projection technology in projectors refers to the methods and technologies used to display images and videos on a screen or surface. Different projection technologies have their own characteristics, advantages, and limitations, which can impact factors such as image quality, brightness, colour accuracy, and overall viewing experience. Here are some common projection technologies used in projectors:
LCD (Liquid Crystal Display):
DLP (Digital Light Processing):
LCoS (Liquid Crystal on Silicon):
LED (Light Emitting Diode) Projection:
Laser Projection:
Hybrid Projection:
When choosing a projector, it's important to consider factors like the intended use (e.g., home theatre, business presentations, education), screen size, ambient lighting conditions, resolution, colour accuracy, and budget. Each projection technology has its strengths and may be better suited for certain scenarios, so it's essential to select the one that aligns with your specific needs and preferences.
Projector offset, also known as lens offset, refers to the vertical position of the projected image in relation to the centerline of the projector's lens. It is an important consideration when setting up a projector, particularly in situations where the projector is not directly centred with the screen or projection surface. Projector offset affects the image's position and ensures that the projected content is correctly aligned and centred on the screen.
Key points about projector offset:
Vertical Offset: Projector offset determines how high or low the projector needs to be positioned in relation to the screen's centerline to achieve a properly aligned image. It is typically measured in terms of percentage or ratio of the image height.
Positive and Negative Offset: Projectors can have positive or negative offset values. Positive offset means that the projector needs to be positioned above the screen's centerline, while negative offset requires the projector to be positioned below the centerline.
Usage Scenarios: Projector offset is particularly relevant in setups where the projector is ceiling-mounted, table-mounted, or positioned on a shelf. It ensures that the projected image is properly aligned with the screen, regardless of the projector's placement.
Lens Design: Projectors are designed with specific lens characteristics, including throw ratio and offset, that determine how the image is projected onto the screen based on the projector's distance from the screen and its vertical position.
Screen Size and Height: The amount of offset needed depends on factors like the screen size, screen height, and the specific projector model's lens characteristics.
Adjustment and Correction: Some projectors offer vertical lens shift or keystone correction features to further fine-tune the image's position and geometry. These features can be useful when setting up the projector in locations where achieving perfect alignment is challenging.
Calculating Offset: Manufacturers typically provide offset information in projector specifications. For example, a projector with a +10% offset means that if the screen's height is H, the projector should be positioned 10% of H above the screen's centerline.
Installation Considerations: When planning the projector installation, consider factors like the desired screen height, distance from the screen, and the projector's offset to ensure proper alignment and an optimal viewing experience.
Lens Shift: Lens shift is a feature found in some projectors that allows you to physically adjust the lens position vertically and/or horizontally without moving the entire projector. This provides additional flexibility for positioning the image precisely on the screen.
Correctly accounting for projector offset is essential to achieving a well-aligned and visually pleasing projected image. Understanding the projector's offset characteristics and how they relate to your screen setup will help you position the projector correctly and ensure an optimal viewing experience for your audience.
Projector resolution refers to the number of individual pixels that a projector can display on a screen or projection surface. It is a critical factor that determines the level of detail and clarity in the projected image. Projector resolution is specified in terms of width and height, typically represented as two numbers (e.g., 1920 x 1080), with the total number of pixels calculated by multiplying the width and height values.
Here are some key points to understand about projector resolution:
Common Resolutions: Projectors are available in various resolutions, including:
Pixel Density: Higher resolutions offer greater pixel density, resulting in sharper and more detailed images. This is particularly noticeable when projecting larger images or when sitting closer to the screen.
Content Compatibility: The projector's resolution should match the resolution of the content being displayed (e.g., movies, presentations, games) to ensure optimal clarity and proper scaling.
Aspect Ratio: Projector resolutions are often associated with specific aspect ratios (e.g., 16:9 for Full HD and 4K UHD, 4:3 for XGA). Aspect ratio refers to the ratio of the width to the height of the projected image.
Viewing Distance: Higher resolutions are more effective when the projected image is larger or when the audience is closer to the screen. For larger screens or immersive experiences, higher resolutions like 4K UHD or Native 4K are beneficial.
Budget and Application: The choice of resolution depends on your budget and the intended use of the projector. Home theatres and professional applications may benefit from higher resolutions, while basic presentations may not require the highest resolution.
Pixel Shift Technology: Some projectors use pixel shift or wobulation technology to simulate higher resolutions by rapidly shifting or wobbling pixels to create the illusion of increased detail.
Content Sources: Ensure that your content sources (e.g., Blu-ray players, streaming devices) and media are compatible with the projector's resolution for optimal playback.
When selecting a projector, consider the resolution that best suits your needs based on factors such as the viewing environment, screen size, content type, and budget. Higher resolutions generally offer improved image quality, but the right choice depends on your specific requirements and preferences.
RMS power, often referred to as "Root Mean Square" power, is a measure of the continuous or average power output of an audio amplifier or speaker system. It represents the steady-state power that the amplifier or speaker can handle or produce without distortion or damage over an extended period of time. RMS power is a crucial specification when evaluating the performance and compatibility of audio equipment.
Here are some key points about RMS power:
Steady-State Power: RMS power is a measure of the continuous, non-peak power output of an audio system. It provides a more accurate representation of the power handling or output capabilities compared to peak power, which represents short bursts of power.
Signal Type: RMS power is relevant for continuous audio signals with varying amplitudes, such as music or speech. It helps determine how loud and clear the audio will be during regular usage.
Amplifiers: For amplifiers, RMS power output indicates the maximum continuous power that the amplifier can deliver to a speaker without distortion. It is typically specified in watts (W) and is often given per channel for multi-channel amplifiers.
Speakers: For speakers, RMS power handling indicates the maximum continuous power that the speaker can handle without being damaged. It helps determine the appropriate amplifier power to pair with the speaker for optimal performance and longevity.
Matching Amplifiers and Speakers: When matching amplifiers and speakers, it's important to ensure that the amplifier's RMS power output matches or is within the range of the speaker's RMS power handling. Mismatched power levels can lead to distortion, reduced audio quality, or even damage to the equipment.
Calculations: RMS power is calculated by squaring the instantaneous power values of an audio waveform, averaging them, and then taking the square root of the result. This process helps smooth out the variations in the waveform and provides a meaningful average power value.
Audio Quality: Adequate RMS power ensures that audio signals can be reproduced clearly and accurately at the desired volume levels without distortion or clipping.
Efficiency: Amplifiers with higher RMS power output are generally capable of driving speakers to louder volumes. However, higher power does not necessarily equate to better audio quality; factors like amplifier design, distortion levels, and speaker characteristics also play a role.
Impedance Considerations: The impedance (measured in ohms) of the speakers connected to an amplifier can affect the amount of power delivered. Many amplifiers specify RMS power output at a specific impedance, such as 8 ohms.
Listening Environment: The power requirements for audio systems depend on the size of the room, speaker sensitivity, and listening preferences. Smaller rooms may require less power, while larger spaces may demand more.
RMS power is an important specification to consider when selecting audio equipment to ensure optimal performance, accurate sound reproduction, and protection of the equipment from damage. It provides a practical measure of the continuous power handling or output capabilities that impact the overall audio experience.
Room calibration and speaker optimisation are techniques used to enhance the audio quality and performance of a sound system, especially in home theatre setups or professional audio environments. These processes aim to mitigate the effects of the physical characteristics of the room and optimise the performance of speakers, ensuring that the audio reproduction is accurate, balanced, and immersive.
Here's an overview of room calibration and speaker optimisation:
Room Calibration: Room calibration involves analysing the acoustic characteristics of a room and making adjustments to the audio system's settings to compensate for the room's acoustic properties. This process helps overcome issues such as uneven frequency response, reflections, standing waves, and resonances that can affect the sound quality.
Measurement Equipment: Specialised audio measurement tools and microphones are used to measure the room's acoustic response. These measurements provide data on frequency response, phase, and other characteristics.
Equalisation (EQ): Room calibration systems often employ digital signal processing (DSP) to apply equalisation adjustments to the audio signals. This helps correct frequency imbalances caused by the room's acoustics.
Time Alignment: Speakers can be positioned at different distances from the listener, leading to phase discrepancies. Room calibration can adjust the time alignment of speakers to ensure that sound waves from different speakers reach the listener's ears at the same time.
Crossover Settings: Room calibration may optimise the crossover settings for multi-speaker setups, ensuring seamless integration between different speaker types.
Bass Management: For subwoofers, room calibration can help set up proper bass management, taking into account subwoofer placement and room modes to achieve smoother and more even bass response.
Room Correction Software: Various room correction software and systems are available that automate the process of measuring, analysing, and adjusting audio signals based on room acoustics.
Speaker Optimisation: Speaker optimisation involves fine-tuning the settings and placement of speakers to achieve the best possible sound quality and coherence within the room.
Placement: Speaker placement is critical for achieving accurate soundstage, imaging, and balance. Optimising speaker placement helps minimise phase cancellations and reflections.
Speaker Positioning: Precise positioning of speakers within the room can lead to improved stereo imaging, soundstage width, and depth.
Crossover Settings: In multi-speaker setups, optimising crossover settings ensures a seamless transition between speakers, preventing frequency gaps or overlaps.
Subwoofer Integration: For systems with subwoofers, optimising their placement and crossover settings enhances bass response and provides a more cohesive low-frequency sound.
Tonal Balance: Adjusting speaker tonal characteristics ensures that the overall sound is balanced and consistent across different listening positions.
Listening Environment: Factors such as room size, shape, furnishings, and wall materials influence speaker optimisation and may require adjustments to achieve optimal sound.
Both room calibration and speaker optimisation contribute to creating an accurate and immersive audio experience. These techniques help overcome room-induced anomalies and tailor the audio system to the specific listening environment, resulting in improved sound quality and a more enjoyable listening or viewing experience.
The RS232 port, also known as a serial port or COM port, is a communication interface that was widely used for connecting computers and peripheral devices for serial data communication. While its popularity has waned in favour of newer communication standards, the RS232 port played a significant role in early computing and is still used in certain applications today. Here's an overview of the RS232 port:
Serial Communication: RS232 is a type of serial communication protocol that transmits data one bit at a time over a single data line. It is a point-to-point communication method, meaning it connects two devices directly.
Physical Connector: The RS232 port typically uses a 9-pin or 25-pin D-sub connector, also known as a serial connector. The 9-pin version is more common for personal computers.
Data Transmission: RS232 allows for asynchronous communication, where data is transmitted without a continuous clock signal. Start and stop bits are used to delineate data frames.
Applications: RS232 was used for various purposes, such as connecting modems, printers, mice, keyboards, barcode scanners, and other peripherals to computers. It also enabled communication between computers and external devices like industrial equipment and instrumentation.
Configuration: RS232 connections required proper configuration of settings such as baud rate (data transmission speed), parity, data bits, and stop bits. Matching settings on both sides of the connection was crucial for successful communication.
Distance and Speed Limitations: RS232 communication was generally limited to short distances (usually up to 50 feet or 15 meters) due to signal degradation. Higher baud rates could further limit cable length.
Legacy Use: While newer communication interfaces like USB and Ethernet have largely replaced RS232 in consumer devices, it is still used in specialised applications, such as industrial automation, scientific instrumentation, and legacy equipment.
Level Shifting: RS232 uses voltage levels of +3 to +15 volts for logic 1 and -3 to -15 volts for logic 0. As such, devices interfacing with RS232 may require level shifting or conversion to match the voltage levels of modern devices.
Adapters: Adapters or converters are available to interface RS232 devices with modern computers or devices lacking native RS232 ports.
Historical Significance: RS232 was a key interface during the early years of computing and contributed to the development of modern data communication protocols. Its legacy can still be seen in the use of COM port designations in Windows operating systems.
While the RS232 port has largely been replaced by more advanced communication interfaces, its historical significance and ongoing use in specific applications make it an important part of the evolution of computer connectivity.
S-Video, short for "Separate Video" or "Super Video," is an analog video signal format that provides improved video quality compared to standard composite video. S-Video separates the video signal into two distinct components: luminance (brightness) and chrominance (colour), resulting in better clarity and reduced colour bleeding. S-Video was commonly used in the past for connecting video sources, such as VCRs, camcorders, and video game consoles, to displays like TVs and monitors.
Key characteristics of S-Video:
Signal Separation: S-Video splits the video signal into two separate signals: Y (luminance) and C (chrominance). This separation reduces interference between the brightness and colour components, resulting in clearer and more detailed images.
Connector: The S-Video connector typically uses a 4-pin mini-DIN connector. It is distinguishable by its circular design and four pins arranged in a square shape. The connector ensures proper connection of both the Y and C signals.
Image Quality: S-Video provides superior image quality compared to composite video, which combines the luminance and chrominance signals into a single channel. S-Video delivers sharper images, better colour accuracy, and reduced artifacts.
Compatibility: S-Video was widely used in the 1990s and early 2000s for connecting various consumer electronics devices to TVs and monitors. It was commonly found on VCRs, DVD players, video game consoles, camcorders, and older TVs.
Usage Decline: With the advent of digital video interfaces like HDMI and DisplayPort, S-Video has become less common and is considered an outdated technology. Many modern devices no longer include S-Video connectors.
Resolution: S-Video supports various video resolutions, including standard definition (SD) formats like 480i and 576i. It does not support high-definition (HD) resolutions.
Audio: S-Video transmits only video signals. Audio signals need to be transmitted separately using other connectors, such as RCA (red and white) audio connectors.
Advancements: S-Video's successor, component video, further improved video quality by separating the signal into three components (Y, Pb, Pr), enabling even better colour reproduction and clarity.
Adapters: Adapters and converters are available to connect S-Video devices to modern displays that lack S-Video inputs. These adapters typically convert the S-Video signal to a more modern format like HDMI or VGA.
While S-Video has largely been replaced by digital interfaces and higher-quality analog options, it played a significant role in improving video quality during its time and paved the way for advancements in video signal transmission and display technologies.
A dual-layer projector screen refers to a type of projection screen that is constructed using two separate layers of material, often with different properties, to enhance the overall viewing experience and image quality. This design is intended to optimise the screen's performance by addressing specific aspects of projection, such as gain, contrast, and light control. Here's how a dual-layer projector screen works and its benefits:
Construction of a Dual-Layer Projector Screen:
A dual-layer projector screen typically consists of the following layers:
Front Layer (Projection Surface): The front layer is the primary projection surface where the image is displayed. This layer is responsible for reflecting and diffusing the projected light to create a clear and visible image for the audience.
Back Layer (Black Backing or Light Control Layer): The back layer serves multiple purposes. It often acts as a black backing to prevent light from passing through the screen material and causing unwanted reflections or bleed-through. Additionally, the back layer may incorporate light-absorbing properties to enhance image contrast and prevent light from scattering.
Benefits of Dual-Layer Projection Screens:
Enhanced Contrast: The use of a black backing layer helps improve image contrast by minimising the reflection of ambient light and enhancing the perceived brightness of the projected image.
Light Control: The back layer's light-absorbing properties contribute to better light control, reducing the impact of ambient light and improving the overall image quality.
Prevention of Light Penetration: The black backing layer prevents light from passing through the screen material, which can help maintain a clean and focused image without interference from rear ambient light sources.
Reduced Light Scattering: The dual-layer design minimises light scattering, resulting in a more defined and sharp image.
Improved Image Immersion: By optimising contrast and light control, dual-layer projector screens can enhance the viewer's sense of immersion, especially in dark viewing environments.
Better Overall Viewing Experience: Dual-layer screens contribute to a higher-quality projection experience, particularly in situations where precise control over light and contrast is essential.
Suitability for Specific Applications: Dual-layer projector screens are often chosen for dedicated home theatres, professional installations, and other scenarios where image quality is a top priority.
It's important to note that not all projector screens are dual-layer. Various screen materials and designs are available, each with its own characteristics and benefits. When selecting a projector screen, consider factors such as the viewing environment, intended use, ambient light conditions, projector specifications, and desired image quality to determine whether a dual-layer screen or another type of screen material best meets your needs.
It refers to the type of fabric or material used on the front layer of the screen where the projected image is displayed. The choice of material surface can significantly impact the quality of the projected image, including factors such as brightness, colour accuracy, contrast, viewing angle, and overall visual experience. Different materials are designed to cater to specific viewing environments and preferences. Here are some common types of material surfaces used in projector screens:
Matte White: Matte white is one of the most common projector screen materials. It provides a balanced reflection of light, resulting in a wide viewing angle and good colour reproduction. Matte white surfaces are suitable for general-purpose applications and rooms with controlled lighting.
High Contrast or Grey: High contrast or grey screens are designed to enhance contrast and black levels. They are particularly useful in environments with ambient light, as they help improve image quality by minimising the impact of external light sources.
Acoustic Transparency: Some projector screens are designed to allow sound to pass through the material, making them suitable for setups where the speakers are positioned behind the screen. These screens maintain both audio and visual quality.
ALR (Ambient Light Rejection): ALR screens are specifically engineered to reject ambient light from certain angles while preserving the quality of the projected image. They are ideal for rooms with significant ambient light or situations where the projector cannot be placed optimally.
Perforated: Perforated screens have small holes that allow sound to pass through, making them suitable for acoustically transparent setups where speakers are placed behind the screen.
3D Silver or Polarised: These screens are designed to work with polarised 3D projection systems, ensuring that each eye sees the correct image polarisation.
Micro-Perforated: Micro-perforated screens have tiny perforations that allow sound to pass through, making them suitable for applications where audio quality is a priority.
Retro-Reflective: Retro-reflective screens are designed to reflect light directly back to the source, making them ideal for situations where the projector is located near the audience.
Tensioned: Tensioned screens are designed to be perfectly flat and taut, ensuring a smooth and uniform projection surface.
Paint-On or DIY Solutions: Some enthusiasts use specialised screen paint to create a projection surface on a wall or other suitable surface.
When selecting a material surface for a projector screen, consider factors such as the viewing environment, ambient light conditions, projector specifications, screen size, and desired image quality. Each type of material surface has its own advantages and considerations, so it's important to choose the one that best aligns with your specific needs and preferences.
"Screen type" in the context of projectors refers to the various categories or classifications of projector screens based on their design, features, and applications. Different screen types are designed to fulfill specific needs and optimise the viewing experience for various settings. Here are some common projector screen types:
Fixed Frame Screen: A fixed frame screen features a rigid frame that holds the projection surface taut. It is permanently mounted to a wall or frame and provides a flat and consistent projection surface. Fixed frame screens are popular for dedicated home theatres and professional installations.
Motorised Electric Screen: Motorised screens are retractable and can be raised or lowered using an electric motor. They offer convenience and flexibility, as they can be hidden when not in use. Motorised screens are commonly used in both home theatres and commercial settings.
Manual Pull-Down Screen: Manual pull-down screens are manually operated and can be pulled down from a roller mechanism to set up for projection. They are portable and suitable for temporary setups or spaces with limited installation options.
Floor-Rising Screen: Floor-rising screens are motorised screens that rise from the floor, eliminating the need for wall mounting. They provide a clean and sleek appearance when retracted.
Tab-Tensioned Screen: Tab-tensioned screens have side tensioning cords or tabs that keep the projection surface flat and smooth. This design minimises wrinkles and ensures uniform tension across the screen.
Portable Tripod Screen: A portable tripod screen features a collapsible tripod stand and a screen surface. It is easy to set up and move, making it suitable for presentations in different locations.
Inflatable Screen: Inflatable screens are large, inflatable structures with a screen surface. They are often used for outdoor movie screenings and events.
Curved Screen: Curved screens have a slight curve to the projection surface. This design is intended to enhance image immersion and provide a more cinematic experience, especially in larger theatres.
Dual-Sided Screen: Dual-sided screens have a projection surface on both sides of the screen, allowing for dual viewing. They are commonly used in commercial displays and digital signage applications.
Multi-Format Screen: Multi-format screens allow for different aspect ratios by using masking or adjustable borders. This versatility is useful for accommodating various content formats.
Specialised Screens: There are specialised screens designed for specific purposes, such as rear projection screens, green screens (chroma key), and more.
When selecting a projector screen type, consider factors such as the intended use, available space, installation requirements, portability, image quality, and budget. The choice of screen type will influence the overall visual experience and how well the projected content is displayed in a given environment.
Signal-to-Noise Ratio (SNR) is a measure used in various fields, including electronics, telecommunications, audio engineering, and signal processing, to quantify the quality of a signal relative to the presence of unwanted noise. SNR compares the level of the desired signal to the level of background noise or interference, providing an indication of how clearly the signal can be distinguished from the noise. It is often expressed in decibels (dB).
In general, a higher SNR indicates a better quality signal, as the desired signal is stronger in relation to the background noise.
Significance of SNR:
Audio Engineering: In audio systems, SNR indicates how much the desired audio signal stands out from the background noise introduced by electronic components, cables, and environmental factors. A high SNR is crucial for clear and high-fidelity audio reproduction.
Telecommunications: In telecommunications, SNR is a key factor in determining the quality of voice or data transmissions over networks. A higher SNR in a communication channel reduces the likelihood of data errors or signal degradation.
Image Processing: In imaging and photography, SNR relates to the clarity and detail of an image. A higher SNR in image sensors leads to less noise in photographs, resulting in sharper and more detailed images.
Wireless Communication: In wireless communication systems, SNR affects the range, reliability, and data throughput of wireless connections. A higher SNR allows for better signal reception and improved communication quality.
Research and Scientific Measurement: In scientific experiments and measurements, SNR is used to assess the accuracy and reliability of collected data. Researchers aim to maximise the SNR to obtain meaningful results.
Digital Signal Processing: In signal processing applications, SNR is used to evaluate the effectiveness of noise reduction techniques and algorithms that enhance the quality of signals.
It's important to note that a very high SNR may not always be achievable due to practical limitations. Balancing the trade-off between signal strength and noise reduction is essential in designing and optimising systems for various applications.
A Smart Voice Assistant, often referred to simply as a "voice assistant" or "virtual assistant," is an AI-powered software application that uses voice recognition technology to understand and respond to spoken commands or queries from users. These assistants are designed to provide information, perform tasks, and interact with users in a natural and conversational manner. They have become an integral part of modern smart devices and platforms.
Key features and capabilities of smart voice assistants include:
Voice Recognition: Smart voice assistants use advanced speech recognition algorithms to accurately transcribe spoken words into text and understand the user's intent.
Natural Language Processing (NLP): NLP enables voice assistants to interpret and process the meaning of spoken language, allowing for more human-like interactions.
Conversational Interaction: Users can have natural conversations with voice assistants, asking questions, giving commands, and receiving responses as if they were interacting with another person.
Information Retrieval: Voice assistants can provide answers to questions, deliver real-time information (e.g., weather, news, sports scores), and perform internet searches.
Task Automation: Users can ask voice assistants to perform tasks such as setting reminders, sending messages, making phone calls, and scheduling appointments.
Device Control: Voice assistants can control smart home devices, adjusting lights, thermostats, locks, and other connected devices using voice commands.
Entertainment: Voice assistants can play music, podcasts, audiobooks, and control media playback on compatible devices.
Navigation and Directions: Voice assistants can provide navigation instructions, directions, and real-time traffic updates for driving, walking, or public transportation.
Shopping and E-Commerce: Users can use voice commands to add items to shopping lists, make purchases, and interact with e-commerce platforms.
Personalisation: Voice assistants learn from user interactions and preferences to offer personalised recommendations and tailored experiences.
Language Support: Many voice assistants support multiple languages and dialects to cater to a global user base.
Some of the most well-known smart voice assistants include:
Amazon Alexa: Developed by Amazon, Alexa powers devices like Amazon Echo speakers and a wide range of third-party smart devices.
Apple Siri: Integrated into Apple devices, Siri provides voice assistance on iPhones, iPads, Macs, and more.
Google Assistant: Developed by Google, the Assistant is available on Android devices, Google Nest smart speakers, and other platforms.
Microsoft Cortana: While originally designed for Windows devices, Cortana's focus has shifted to enterprise applications.
Samsung Bixby: Developed by Samsung, Bixby is integrated into Samsung Galaxy devices.
These voice assistants are constantly evolving and expanding their capabilities through software updates and integration with third-party services. They play a central role in the development of smart homes, internet of things (IoT) devices, and the broader trend of voice-enabled technology.
There are several types of speakers designed for various audio applications, each with its own characteristics and purposes. Here are some common types of speakers:
Bookshelf Speakers: These compact speakers are designed to be placed on shelves, tables, or stands. They are often used in small to medium-sized rooms and provide balanced sound quality for music and home theatre setups.
Floorstanding Speakers (Tower Speakers): These larger speakers stand on the floor and typically consist of multiple drivers, offering powerful and full-range audio reproduction. They are ideal for larger rooms and audiophile setups.
Subwoofers: Subwoofers specialise in reproducing low-frequency sounds (bass). They are commonly used in home theatre systems and music setups to enhance the depth and impact of audio.
Soundbars: Soundbars are elongated speaker systems that provide improved audio compared to built-in TV speakers. They are designed to be placed below or above the TV and are popular for home theatre setups.
Centre Channel Speakers: These speakers are part of a home theatre system and are positioned above or below the TV. They primarily handle dialogue and center-panned audio, enhancing vocal clarity in movies and TV shows.
Surround Speakers: Surround speakers are used in home theatre setups to create a three-dimensional soundstage by placing them behind or to the sides of the listening area.
In-Wall and In-Ceiling Speakers: These speakers are mounted directly into the walls or ceilings of a room, providing a discreet and space-saving audio solution.
Outdoor Speakers: Designed to withstand weather conditions, outdoor speakers are used in outdoor entertainment areas, patios, and gardens.
Portable Bluetooth Speakers: These battery-powered speakers connect wirelessly to devices like smartphones and tablets, making them suitable for on-the-go listening.
Studio Monitors: Also known as reference monitors, these speakers are designed for audio production and recording purposes. They provide accurate and uncoloured sound reproduction.
Gaming Speakers: Tailored for gaming setups, these speakers provide immersive audio experiences, often with features like surround sound and RGB lighting.
Car Speakers: Specifically designed for automotive applications, car speakers are used in car audio systems to provide sound within the vehicle.
Ceiling Speakers: Similar to in-ceiling speakers, these speakers are recessed into the ceiling and are commonly used in commercial spaces, public venues, and home audio systems.
Horn Speakers: Horn speakers use a horn-shaped enclosure to increase efficiency and direct sound, making them suitable for outdoor events and public address systems.
Line Array Speakers: Line array speakers are often used in large venues and concerts to create even sound distribution across a wide area.
Ribbon Speakers: Ribbon speakers use a thin ribbon of material to generate sound, offering detailed high-frequency reproduction.
Each type of speaker is designed to address specific audio needs, room sizes, and preferences. When choosing speakers, consider factors such as the intended use, room acoustics, audio quality, budget, and compatibility with other audio components.
The term "speed" in the context of turntables refers to the rotational speed at which the turntable's platter spins. The rotational speed is typically measured in revolutions per minute (RPM) and determines how fast the vinyl record rotates while being played. The correct speed is crucial for accurate playback and sound quality, as different vinyl records are designed to be played at specific speeds. The two most common speeds for turntables are 33 1/3 RPM and 45 RPM. Here's what each speed means:
33 1/3 RPM (Revolutions Per Minute): This speed is commonly referred to as "33s" or "LP" (Long Play). Most full-length albums (LPs) and many extended play (EP) records are designed to be played at 33 1/3 RPM. When the turntable is set to this speed, the record rotates at 33 and one-third revolutions per minute.
45 RPM: This speed is often referred to as "45s" or "singles." 7-inch vinyl singles and some EP records are typically played at 45 RPM. When the turntable is set to this speed, the record rotates at 45 revolutions per minute.
Some turntables also offer additional speed options, such as 78 RPM, which was a common speed for older shellac records. However, 78 RPM is less commonly used today, and not all turntables support it.
It's important to set the correct speed on the turntable based on the type of record you are playing. Playing a record at the wrong speed can affect pitch and sound quality, making the music sound too slow or too fast. Many modern turntables include a switch or button to select between the standard speeds of 33 1/3 RPM and 45 RPM.
When playing records, be sure to consult the record label or sleeve for information about the correct speed for that specific record. Setting the turntable to the correct speed ensures that you'll enjoy the music as intended by the artists and producers.
High Dynamic Range (HDR) is a technology used in displays and content creation to enhance the visual experience by providing a wider range of brightness, contrast, and colour compared to standard dynamic range (SDR) content. HDR formats define the standards and specifications for delivering and displaying high dynamic range content. Different HDR formats are used to encode and deliver HDR content for various devices and platforms. Here are some of the notable HDR formats:
HDR10: HDR10 is the most widely used and basic HDR format. It uses a static metadata approach, where the maximum brightness and colour information are encoded in the content itself. HDR10 content is supported by a wide range of HDR-capable displays.
Dolby Vision: Dolby Vision is an advanced HDR format developed by Dolby Laboratories. It uses dynamic metadata, allowing the content to adjust brightness and colour settings scene by scene or even frame by frame. Dolby Vision offers enhanced visual quality and is supported by select TVs and streaming services.
HLG (Hybrid Log-Gamma): HLG is a backward-compatible HDR format developed collaboratively by the BBC and NHK. It is designed to work well with both HDR and SDR displays, making it suitable for broadcasting and live content.
Advanced HDR by Technicolor: This HDR format, developed by Technicolor, provides improved colour accuracy and dynamic range. It is used in select content and displays.
SL-HDR1 (Single-Layer HDR 1): Developed by the Blu-ray Disc Association (BDA), SL-HDR1 is an HDR format that can be used with SDR displays to enhance their dynamic range.
Panasonic's HDR10+: Similar to Dolby Vision, HDR10+ uses dynamic metadata for scene-by-scene optimisation. It is primarily supported by Panasonic and Samsung devices.
IMAX Enhanced: IMAX Enhanced is a certification program that includes both hardware and content standards for optimised audio and video quality, including HDR. It is designed to replicate the IMAX experience in home theatres.
Adobe Vision: Adobe Vision is used in professional content creation workflows to support wide colour gamuts and dynamic range.
BT.2100 (ITU-R Recommendation BT.2100): This recommendation from the International Telecommunication Union (ITU) provides specifications for HDR and wide colour gamut in video broadcasting.
It's important to note that the availability of HDR formats may vary based on the content source, the playback device, and the display. When viewing HDR content, it's essential to ensure that both the content source (e.g., streaming service, Blu-ray disc) and the display device (e.g., TV, monitor) support the same HDR format to achieve the best visual experience.
Surround channel configuration refers to the arrangement and placement of speakers in a surround sound system to create an immersive audio experience. Surround sound systems use multiple speakers placed strategically around the listener to reproduce audio from different directions, enhancing the sense of realism and spatial depth in movies, music, and other audio content. The most common surround channel configurations include:
5.1 Channel Surround Sound:
7.1 Channel Surround Sound:
9.1 and 9.1.2 Channel Surround Sound (Dolby Atmos Enabled):
11.1 and 11.1.4 Channel Surround Sound (Dolby Atmos Enabled):
It's important to note that different surround sound formats, such as DTS:X and Auro-3D, may offer variations in channel configurations and speaker placements. The choice of surround channel configuration depends on factors such as the size and layout of the room, the capabilities of the audio equipment, personal preferences, and the type of audio content being enjoyed.
To achieve the best results, proper speaker placement, calibration, and optimisation are essential. Many AV receivers and processors come with built-in room calibration systems that help optimise the audio performance based on the room's acoustics and the specific speaker configuration in use.
In the context of projectors, the throw ratio refers to the relationship between the distance from the projector's lens to the screen (throw distance) and the width of the projected image. It helps determine how large or small the projected image will be based on the projector's placement. The throw ratio is an important consideration when selecting a projector for a specific room or application. Projectors with different throw ratios are designed to accommodate various installation setups. Here's how to interpret throw ratios for projectors:
Short Throw Projectors: Short throw projectors have a low throw ratio, typically ranging from 0.3:1 to 1.0:1. These projectors are capable of producing large images from a short distance. They are ideal for small rooms or situations where space is limited.
Ultra Short Throw Projectors: Ultra short throw projectors have an even lower throw ratio, often less than 0.3:1. These projectors can be placed very close to the screen or wall, and they are commonly used for interactive displays or setups where the projector is ceiling-mounted directly above the screen.
Standard Throw Projectors: Standard throw projectors have a throw ratio ranging from around 1.2:1 to 2.0:1. They are suitable for medium-sized rooms and offer a balance between projector placement flexibility and image size.
Long Throw Projectors: Long throw projectors have higher throw ratios, typically above 2.0:1. They are designed for larger venues and installations where the projector needs to be placed farther away from the screen to create a larger image.
To calculate the throw distance for a specific projector and screen size, you can use the following formula:
Throw Distance=Throw Ratio×Image Width
Where:
When choosing a projector, consider factors such as the room size, screen size, and the available installation space. Different throw ratios offer varying degrees of installation flexibility, so it's important to select a projector that can be positioned optimally for your intended use.
THX® Certification is a quality assurance program and standard for audio and visual reproduction developed by THX Ltd., a company founded by filmmaker George Lucas. The THX certification process is designed to ensure that audio and visual equipment, such as home theatre systems, speakers, amplifiers, displays, and cinemas, meet certain performance standards for delivering high-quality and immersive entertainment experiences. The THX certification program covers both commercial and consumer products.
THX certification involves rigorous testing, evaluation, and verification of various technical parameters to ensure that the equipment meets specific audio and visual performance benchmarks. The goal of THX certification is to reproduce the content exactly as intended by the creators, providing consumers and professionals with confidence in the quality of their audio and visual systems.
Key features and benefits of THX certification include:
Audio Quality: THX-certified audio equipment is tested for frequency response, distortion, noise levels, and overall sound performance to ensure accurate and faithful audio reproduction.
Video Quality: THX-certified displays and projectors are evaluated for colour accuracy, contrast, brightness, and other visual parameters to deliver a high-quality and cinematic visual experience.
Speaker Performance: THX-certified speakers are designed and tested to deliver balanced and immersive soundscapes, whether in home theatres or commercial cinema environments.
Room Acoustics: THX-certified cinemas and home theatres are evaluated for proper acoustics and speaker placement to optimise the audio experience in real-world listening environments.
Consistency: THX certification helps ensure consistent performance across different brands and models, allowing consumers to make informed decisions when purchasing audiovisual equipment.
Cinema Standards: THX works with commercial cinemas to ensure that their audio and visual systems meet the highest standards for presenting movies to audiences.
It's important to note that THX certification is not mandatory for audiovisual equipment, and there are many high-quality non-certified products on the market. However, THX certification serves as a recognised mark of quality and performance in the industry. Consumers looking for an assurance of premium audio and visual performance may consider THX-certified products as a benchmark for their purchases.
THX offers various levels of certification, including THX Select, THX Certified, and THX Ultra, each representing different levels of performance and meeting specific criteria. The THX certification logo is typically displayed on certified products and in certified theatres to indicate that they meet THX's rigorous standards.
A tonearm is a crucial component of a vinyl record player (turntable) that holds the cartridge and stylus, allowing them to track the grooves of a vinyl record and convert the physical movements into electrical signals that are then amplified and played through speakers. The tonearm's design and mechanics play a significant role in achieving accurate and high-quality audio reproduction from vinyl records.
Key components and features of a tonearm include:
Arm Tube: The arm tube is the main structural component of the tonearm. It typically has a straight or curved shape and is designed to provide stability while allowing the cartridge to move smoothly along the record's grooves.
Cartridge Mounting Point: The cartridge, which includes the stylus (needle) and the housing containing the coils, is mounted at the end of the tonearm. Proper alignment and tracking force are essential for accurate playback.
Counterweight: A counterweight is used to balance the tonearm and set the proper tracking force (downward pressure) on the stylus. Proper tracking force ensures optimal contact between the stylus and the record without causing excessive wear.
Anti-Skate Mechanism: The anti-skate mechanism counteracts the force that pulls the tonearm toward the centre of the record, helping to maintain proper tracking across the entire record surface.
Cueing Mechanism: The cueing mechanism allows the user to gently raise and lower the tonearm onto the record, avoiding abrupt and potentially damaging contact.
Adjustment Controls: Tonearms often have adjustable features for setting tracking force, anti-skate, and other parameters to optimise performance based on the cartridge and record being played.
Cables: Tonearms may have internal wiring or cables that carry the electrical signals from the cartridge to the turntable's electronics.
Tonearms come in various designs and materials, ranging from simple straight arms to more complex curved or S-shaped arms. High-quality tonearms are meticulously engineered to minimise vibrations, resonances, and other mechanical disturbances that can affect audio fidelity. Some turntables feature interchangeable tonearms, allowing users to upgrade or customise the tonearm to match their preferences and cartridges.
A well-designed tonearm, when paired with a high-quality cartridge and stylus, contributes to accurate tracking, low distortion, and faithful reproduction of the recorded audio on vinyl records. Proper setup and alignment of the tonearm are crucial for achieving optimal performance and extending the lifespan of both the stylus and the records.
Total Harmonic Distortion (THD) is a measurement used to quantify the level of distortion introduced by a device or system when processing or reproducing an audio signal. THD is commonly expressed as a percentage and indicates the proportion of additional harmonics (frequencies that are multiples of the fundamental frequency) introduced by the device or system relative to the original signal.
In the context of audio equipment, such as amplifiers, speakers, and headphones, THD provides insight into how faithfully the equipment reproduces the original audio signal. Lower THD values are generally preferred because they indicate that the equipment is producing less distortion and maintaining the integrity of the audio signal.
THD can be caused by nonlinearities in electronic components, impedance variations, clipping, and other factors. It's important to note that some level of distortion is inherent in all audio systems, and very low levels of THD are often imperceptible to the human ear. However, excessive THD can result in audible artifacts and negatively impact audio quality.
THD is often reported for different harmonic orders, such as THD+N (Total Harmonic Distortion plus Noise), which includes both harmonic distortion and other forms of noise present in the signal.
When comparing audio equipment, especially amplifiers and speakers, it's important to consider THD values, but also take into account other factors such as frequency response, signal-to-noise ratio, and dynamic range. While a low THD value is generally desirable, it's just one aspect of overall audio performance, and a combination of factors contributes to the perception of high-quality sound.
The turntable platter is a critical component of a vinyl record player (turntable). It serves as the rotating platform on which the vinyl record is placed and spins during playback. The platter's design and construction can significantly affect the overall performance and audio quality of the turntable.
Key features and considerations related to the turntable platter include:
Material: Platters are typically made from various materials, each with its own characteristics. Common platter materials include:
Size and Weight: The size and weight of the platter can influence rotational stability and reduce speed variations (wow and flutter). Heavier platters are often preferred for their inertial benefits.
Speed Consistency: The platter's consistency in speed rotation (RPM) is crucial for accurate playback. Heavier platters tend to maintain speed more consistently.
Isolation and Damping: Some platters incorporate damping materials or design features to reduce vibration, resonance, and mechanical noise that can affect audio quality.
Bearing System: The platter is supported by a bearing system, which allows it to rotate smoothly. High-quality bearings contribute to reduced friction and improved performance.
Mats and Slipmats: A mat or slipmat is placed on the platter's surface to provide cushioning and improve contact between the vinyl record and the platter. Various materials and thicknesses are available to influence sound characteristics.
Upgradability: Some turntables allow users to upgrade the platter or use aftermarket accessories to enhance performance.
Integration with Drive System: The platter is connected to the turntable's drive system (belt drive or direct drive) to achieve accurate and consistent rotation.
Aesthetics: The design and appearance of the platter can contribute to the turntable's overall aesthetic appeal.
The quality of the turntable platter, along with other components such as the tonearm, cartridge, and motor contributes to the overall audio performance and listening experience. A well-designed platter helps reduce unwanted resonances, speed fluctuations, and mechanical interference, resulting in more accurate and faithful reproduction of the music recorded on vinyl records.
A tweeter is a type of loudspeaker driver designed to reproduce high-frequency sounds in an audio system. It is responsible for producing the treble or high-pitched frequencies in music and audio recordings. Tweeters are essential components in multi-driver speaker systems, such as two-way, three-way, and more complex speaker designs, where different drivers are dedicated to reproducing specific frequency ranges.
Key characteristics and features of tweeters include:
Frequency Range: Tweeters are designed to handle high-frequency sounds, typically ranging from around 2,000 Hertz (Hz) to 20,000 Hz (20 kHz) and above. This range covers the uppermost portion of the audible spectrum.
Diaphragm Material: Tweeter diaphragms are often made from lightweight and rigid materials that can respond quickly to high-frequency vibrations. Common diaphragm materials include fabric, silk, aluminum, titanium, beryllium, and diamond.
Driver Types: Tweeters can be found in various driver designs, including dome tweeters, ribbon tweeters, cone tweeters, and horn-loaded tweeters. Each type has its own characteristics and advantages.
Dispersion: Tweeters are designed to provide wide dispersion of high-frequency sound to ensure that the treble frequencies are evenly distributed throughout the listening area.
Crossover: In multi-driver speaker systems, a crossover network is used to direct specific frequency ranges to different drivers. The crossover ensures that the tweeter only receives and reproduces high-frequency signals.
Power Handling: Tweeters have different power handling capabilities, which indicate the maximum amount of power they can handle without distortion or damage.
Sensitivity: Tweeter sensitivity refers to how efficiently the tweeter converts electrical signals into sound. Higher sensitivity allows for more output with less input power.
Waveguide or Horn: Some tweeters are equipped with waveguides or horns to control and improve the dispersion of high-frequency sound.
Tweeters work in conjunction with other drivers in a speaker system, such as midrange drivers and woofers, to create a full and balanced sound. The combined efforts of these drivers result in accurate audio reproduction across the entire frequency spectrum.
When selecting speakers or audio equipment, it's important to consider the quality and design of the tweeters to ensure that they contribute to clear and detailed treble reproduction. A well-designed tweeter can enhance the overall audio experience by reproducing intricate details, harmonics, and spatial cues present in music and audio recordings.
USB-A ports are a type of Universal Serial Bus (USB) connector that has been widely used in various electronic devices for data transfer, charging, and connecting peripherals. The USB-A port has a distinctive rectangular shape with a flat, rectangular metal connector that can be inserted into the port in one orientation.
Key features and uses of USB-A ports include:
Data Transfer: USB-A ports are used for transferring data between devices, such as connecting external hard drives, flash drives, smartphones, digital cameras, printers, and other peripherals to a computer.
Charging: USB-A ports are commonly used for charging devices like smartphones, tablets, and other gadgets. Many wall chargers, car chargers, and computer USB ports feature USB-A connectors for charging purposes.
Compatibility: USB-A ports have been in use since the early days of USB technology and are found on a wide range of devices. They are backward compatible with older USB standards, such as USB 2.0 and USB 1.1.
USB Hubs: USB-A ports are often found on USB hubs, which allow multiple USB devices to be connected to a single USB port on a computer.
Peripherals: Many external peripherals, such as keyboards, mice, external hard drives, and printers, use USB-A connectors to connect to computers.
Variants: USB-A ports come in different versions, including USB 3.0 (also known as USB 3.1 Gen 1), USB 3.1 (also known as USB 3.1 Gen 2), and USB 2.0. The version determines the data transfer speed and capabilities of the port.
Power Output: USB-A ports can provide varying levels of power output for charging devices. Standard USB-A ports can deliver up to 500mA at 5V (USB 2.0) or higher with USB 3.0 and later versions.
It's important to note that USB-A ports have been gradually being phased out in favour of newer USB connectors, such as USB-C. USB-C offers several advantages, including a reversible design, faster data transfer speeds, higher power delivery capabilities, and the ability to support various protocols, such as DisplayPort and Thunderbolt.
When using USB-A ports, it's essential to ensure compatibility between the connected devices and to follow proper protocols for safely connecting and disconnecting devices to avoid data loss or damage.
USB-B ports are another type of Universal Serial Bus (USB) connector commonly used for data transfer, device connectivity, and peripheral attachment. USB-B connectors have a distinct square or rectangular shape with a flat metal connector that is typically larger and less common than the USB-A connectors. USB-B ports are often found on various devices, particularly peripherals that require a stable and secure connection.
Key features and uses of USB-B ports include:
Peripheral Connectivity: USB-B ports are commonly used on peripherals that require a more secure and stable connection than the smaller USB-A connectors provide. These peripherals include printers, scanners, external hard drives, audio interfaces, and certain types of audio equipment.
Data Transfer: USB-B ports allow data transfer between devices, similar to USB-A ports. Devices such as printers and external hard drives use USB-B connectors to communicate with computers.
Printers and Scanners: Many printers and scanners use USB-B connectors to establish a reliable connection with computers, enabling them to send print jobs and scan documents.
Audio Equipment: Some professional audio equipment and interfaces use USB-B connectors for transmitting audio data to and from computers.
Square and Rectangular Variants: USB-B connectors come in different shapes, including square and rectangular designs. The most common rectangular variant is known as USB Type-B or USB-B, while the square variant is often referred to as USB Mini-B.
USB Hubs: USB-B connectors are also found on USB hubs, allowing multiple USB devices to be connected to a single USB port on a computer.
Power Delivery: USB-B connectors can provide power, but their primary purpose is data transfer and device connectivity. Power delivery capabilities may vary based on the USB standard (USB 2.0, USB 3.0, etc.).
It's worth noting that USB-B connectors have also seen changes and advancements over the years, with USB 3.0 and later versions offering increased data transfer speeds and improved power delivery compared to USB 2.0. However, like USB-A connectors, USB-B connectors have also been gradually replaced by the more versatile and reversible USB-C connectors in many newer devices.
When using USB-B ports and connectors, it's important to ensure compatibility between the devices being connected and to handle the connectors carefully to avoid damage to the connectors or the connected devices.
USB-C (also known as USB Type-C) is a versatile and widely adopted Universal Serial Bus (USB) connector standard that offers several benefits over its predecessors, such as USB-A and USB-B. USB-C connectors are small, reversible, and capable of handling various functions, including data transfer, power delivery, and video output. USB-C has become the standard connector for many modern devices and peripherals.
Key features and uses of USB-C ports include:
Reversible Design: One of the most notable features of USB-C is its reversible design, allowing the connector to be inserted into the port in either orientation. This eliminates the frustration of trying to insert the connector the "right way."
Versatility: USB-C ports support a wide range of functions, including data transfer (USB 3.0, USB 3.1, and USB 3.2), power delivery, and video output (DisplayPort, HDMI, and Thunderbolt 3).
Data Transfer: USB-C supports high-speed data transfer, with various versions offering different data transfer rates (e.g., USB 3.1 Gen 1, USB 3.1 Gen 2, USB 3.2).
Power Delivery: USB-C ports can deliver power to connected devices, allowing for faster charging of smartphones, laptops, and other gadgets. Power Delivery (PD) protocols enable higher power levels and bi-directional charging.
Video Output: USB-C can support video output to external displays using DisplayPort or alternate modes like HDMI and Thunderbolt 3. This enables users to connect their laptops or devices to external monitors, projectors, and TVs.
Audio: USB-C can also support audio output, allowing users to connect headphones, speakers, and other audio devices directly to USB-C ports.
Single Cable Solution: USB-C's versatility makes it possible to use a single cable for various functions, including data transfer, charging, and video output. This is particularly useful for laptops and other devices with limited port availability.
Compatibility: USB-C is backward compatible with older USB standards (USB 2.0, USB 3.0) through the use of adapters or cables.
Adoption: USB-C has become the standard connector for many devices, including laptops, smartphones, tablets, monitors, docking stations, and accessories.
Thunderbolt 3: USB-C ports that support Thunderbolt 3 offer even higher data transfer speeds and more advanced features, including daisy-chaining multiple devices and connecting external GPUs.
USB-C has become increasingly prevalent in consumer electronics and is widely embraced by manufacturers due to its compact design and broad functionality. However, it's important to note that not all USB-C ports offer the same features, as some may only support specific functions (e.g., data transfer but not video output). When using USB-C, it's important to check the specifications and capabilities of the ports and devices being used to ensure proper compatibility and functionality.
iPods and iPhones typically use Apple's proprietary Lightning connector for data transfer, charging, and audio connectivity. However, in the context of using standard USB ports for these devices, there are a few important considerations:
USB-A to Lightning Cable: To connect an iPod or iPhone with a Lightning connector to a standard USB-A port (such as those found on computers, chargers, or USB hubs), you would need a USB-A to Lightning cable. One end of the cable has a USB-A connector that plugs into the USB port, while the other end has a Lightning connector that plugs into the iPod or iPhone.
Data Transfer and Charging: The USB-A to Lightning cable allows you to transfer data between your iPod or iPhone and a computer, as well as charge the device using a USB-A port.
Charging Speed: Charging speeds may vary based on the power output of the USB-A port and the capabilities of the iPod or iPhone. Newer iPhones and iPods support faster charging when connected to higher-powered USB-A ports.
Compatibility: The USB-A to Lightning cable is compatible with various iPod models, as well as iPhone models that use the Lightning connector (iPhone 5 and later models).
Audio Output: The USB-A to Lightning cable can also be used to connect some iPod and iPhone models to audio equipment, such as car stereos, speakers, or headphones, for audio playback. However, some audio accessories may require specific compatibility with Apple's MFi (Made for iPhone/iPod/iPad) program.
It's important to note that while USB-A to Lightning cables allow for data transfer, charging, and some audio connectivity, they do not support all the features available through the Lightning connector. For instance, certain high-resolution audio formats and advanced functionality, such as video output, may require Apple-specific accessories or adapters.
Additionally, newer iPhones (iPhone 8 and later) and iPods (7th generation and later) support wireless charging, which allows you to charge the device using compatible wireless charging pads or docks without the need for a physical cable connection.
When using USB-A to Lightning cables or any other accessories, make sure to use genuine Apple-certified products to ensure compatibility, safety, and optimal performance with your iPod or iPhone.
Vertical lens shift is a feature found in many projectors that allows you to adjust the position of the projected image vertically without physically moving the projector itself. This feature is particularly useful when you need to align the image with the screen's top or bottom edge, correct for keystone distortion, or optimise the projection setup in various room configurations.
Here's how vertical lens shift works and why it's beneficial:
Adjusting Image Position: When a projector is placed on a surface, the position of the projected image is typically aligned with the centre of the projector's lens. However, this may not always be ideal, especially if the projector needs to be placed above or below the screen. Vertical lens shift enables you to move the projected image up or down while keeping the projector stationary.
Keystone Correction: Keystone distortion occurs when the projector is not aligned perfectly perpendicular to the screen, causing the projected image to appear wider at the top or bottom. Vertical lens shift can help correct this distortion by allowing you to adjust the image position vertically, effectively minimising keystone effects.
Flexible Installation: Vertical lens shift provides greater flexibility when it comes to projector installation. It allows you to mount the projector in various positions—such as on a ceiling mount or on a table—while still achieving a properly aligned image on the screen.
Optimal Viewing Angle: In situations where the projector needs to be ceiling-mounted or placed higher up, vertical lens shift helps ensure that the projected image is at an optimal height for viewers, preventing them from straining their necks or adjusting seating arrangements.
Avoiding Screen Obstacles: In cases where there are obstacles, such as furniture or other equipment, near the bottom of the screen, vertical lens shift can help raise the projected image to avoid these obstructions.
It's important to note that the extent of vertical lens shift varies from one projector model to another. Some projectors offer a significant range of vertical lens shift, allowing for greater adjustment, while others may have more limited shift capabilities. When considering a projector with vertical lens shift, be sure to check the specifications for details on the range of adjustment and ensure that it meets your specific installation needs.
Vertical lens shift is just one of many features that contribute to the flexibility and ease of use when setting up a projector for optimal image quality in different environments.
VGA (Video Graphics Array) and RGB (Red, Green, Blue) are terms commonly used in the context of video signals and display connectivity. They refer to a type of analog video connection that was widely used for computer monitors and projectors before the transition to digital video interfaces like HDMI and DisplayPort.
VGA/RGB Input and Output refer to the ability of a device, such as a computer, projector, monitor, or AV receiver, to send or receive analog video signals using VGA or RGB connectors. Here's what these terms mean:
VGA (Video Graphics Array) Input/Output:
RGB (Red, Green, Blue) Input/Output:
Devices equipped with VGA/RGB input/output allow you to connect and display analog video signals, typically from computers or older video sources, on compatible displays or projectors. However, as technology has advanced, digital video interfaces like HDMI, DisplayPort, and DVI (Digital Visual Interface) have become more prevalent due to their ability to transmit higher-quality digital signals and support additional features like audio and advanced resolutions.
If you're working with older equipment that uses VGA or RGB connections, it's important to ensure that the devices you're connecting are compatible in terms of signal type, resolution, and connector type. Many modern displays and projectors may not have VGA or RGB inputs, so you might need to use adapters or converters to connect to newer equipment.
"Watts RMS per Channel (4 Ω)," "Watts RMS per Channel (6 Ω)," and "Watts RMS per Channel (8 Ω)" refer to the power output specifications of an audio amplifier for each individual audio channel when driving speakers with different nominal impedance values of 4 ohms, 6 ohms, and 8 ohms, respectively. These specifications indicate the amplifier's power delivery capabilities based on the impedance of the connected speakers.
Here's what each specification signifies:
Watts RMS per Channel (4 Ω):
Watts RMS per Channel (6 Ω):
Watts RMS per Channel (8 Ω):
These specifications provide insight into how the amplifier's power output varies depending on the impedance of the connected speakers. Different speakers may have varying impedance levels, and the amplifier's ability to deliver power to match the impedance is important for optimal performance and sound quality.
It's important to consider these specifications when selecting an amplifier to ensure compatibility with the speakers you plan to use. Using an amplifier that is appropriately matched to the impedance of the speakers helps ensure efficient power delivery, optimal sound quality, and protection of both the amplifier and the speakers from potential damage.
When comparing amplifier specifications, having information about the "Watts RMS per Channel" for different impedance levels allows you to make informed decisions based on your specific speaker setup and requirements.
"Watts RMS per Channel (Continuous)" refers to the continuous power output capability of an audio amplifier for each individual audio channel. This specification indicates the amount of electrical power that the amplifier can deliver to the connected speakers or headphones on a continuous basis without exceeding safe operating limits.
Here's what "Watts RMS per Channel (Continuous)" signifies:
Watts (W): Watts are a unit of measurement for power. In this context, it represents the electrical power that the amplifier can deliver to the connected speakers or headphones.
RMS (Root Mean Square): RMS power provides an accurate measurement of the continuous, steady-state power that the amplifier can deliver. It is a more meaningful representation of the amplifier's performance compared to peak power.
Per Channel: Each audio channel (e.g., left and right channels in a stereo setup) is capable of delivering a specific amount of continuous power to the connected speakers or headphones.
The "Continuous" aspect is important because it emphasises that the power output is sustained over time. This is in contrast to peak power, which represents the maximum power that the amplifier can deliver for short bursts. Continuous power is a more realistic representation of the amplifier's capabilities for regular audio playback, as audio signals are dynamic and vary in intensity.
When comparing amplifiers, looking at the "Watts RMS per Channel (Continuous)" specification helps you understand how much power the amplifier can deliver to your speakers or headphones for typical music playback or audio applications. Properly matching the amplifier's power output to the impedance of the connected speakers is crucial for achieving optimal sound quality, preventing distortion, and ensuring both the amplifier and speakers operate within safe limits.
Keep in mind that factors such as speaker sensitivity, room size, and listening preferences also play a role in determining the appropriate amplifier power. It's important to select an amplifier that provides enough power to drive your speakers effectively while taking into consideration the intended use and volume levels.
Wireless LAN, commonly referred to as Wi-Fi (Wireless Fidelity), is a technology that allows devices to connect to the internet and communicate with each other wirelessly using radio waves. Wi-Fi is a fundamental technology in modern networking, enabling wireless connectivity for a wide range of devices, from smartphones and laptops to smart home devices and IoT (Internet of Things) devices.
Key features and concepts related to Wi-Fi include:
Wireless Access Points (APs): Access points are devices that create Wi-Fi networks. They transmit and receive data between Wi-Fi-enabled devices and the wired network infrastructure, such as routers and switches.
Wi-Fi Standards: Wi-Fi technology has evolved over the years, with different generations or standards providing improvements in data transfer speed, range, and capabilities. Common Wi-Fi standards include 802.11n, 802.11ac, and 802.11ax (Wi-Fi 6).
Frequency Bands: Wi-Fi operates in specific frequency bands, most commonly in the 2.4 GHz and 5 GHz bands. The 5 GHz band generally offers higher data transfer speeds and less interference but may have slightly shorter range compared to the 2.4 GHz band.
Channels: Wi-Fi channels are specific frequencies within the frequency bands. Channels are used to avoid interference between neighboring networks.
SSID (Service Set Identifier): The SSID is the name of a Wi-Fi network. When you search for available Wi-Fi networks on your device, you see a list of SSIDs to choose from.
Encryption: Wi-Fi networks can be secured using encryption protocols like WPA2 (Wi-Fi Protected Access 2) or WPA3. Encryption helps protect data transmitted over the wireless network from unauthorised access.
Authentication: Wi-Fi networks often require a password or other authentication method to ensure that only authorised users can connect.
Range: The range of a Wi-Fi network depends on factors like the power of the wireless access point and obstacles in the environment. Signal strength may weaken over distance or due to interference from walls, floors, and other electronic devices.
Wireless LAN Controllers: In enterprise or larger network setups, wireless LAN controllers manage multiple access points, optimising network performance, security, and roaming capabilities.
Wi-Fi is essential for enabling wireless internet connectivity, allowing devices to access online services, browse the web, stream media, and interact with cloud-based applications. It has transformed the way we use and interact with technology, enabling seamless and convenient connectivity in various environments, from homes and offices to public spaces and public transportation.
Wireless technology has made significant advancements in the audiovisual (AV) industry, transforming the way audio and video content is transmitted, shared, and experienced. Wireless solutions in the AV industry offer greater flexibility, ease of installation, and improved mobility for various applications. Here are some ways wireless technology is used in the AV industry:
Wireless Audio Transmission:
Wireless Video Transmission:
Wireless Presentation and Collaboration:
Wireless Control and Automation:
Wireless Streaming and Distribution:
Wireless VR and AR Experiences:
Wireless Video Walls and Digital Signage:
Wireless Integration in Home Theatres:
Wireless technology has brought new levels of convenience, efficiency, and creativity to the AV industry, enabling professionals and consumers to create, share, and enjoy audiovisual content in innovative ways. As wireless technologies continue to evolve, we can expect further advancements and applications that enhance how we experience and interact with AV content.
The size of a woofer bass driver is typically measured in inches (in) rather than millimetres (mm), as it is a common standard for speaker measurements. Woofers are responsible for producing low-frequency sounds, or bass, in audio systems. The size of the woofer driver can significantly impact the speaker's ability to reproduce deep and impactful bass frequencies.
Common woofer sizes for speakers are typically measured in inches and include sizes like 8 inches, 10 inches, 12 inches, and larger. The larger the woofer's diameter, the more air it can move, resulting in potentially deeper and more powerful bass output.
For reference, here's a rough conversion from inches to millimetres for some common woofer sizes:
Keep in mind that the actual performance of a woofer is influenced by factors beyond its size, such as the design of the speaker enclosure, the materials used for the woofer cone, and the quality of the overall speaker construction. When choosing speakers, consider the woofer size along with other specifications to ensure that the speakers meet your desired audio performance and room size requirements.
"Wow and flutter" are terms used to describe two different types of speed irregularities in audio playback, particularly in analog audio equipment like tape decks, record players (turntables), and other devices that use spinning media. These irregularities can lead to variations in pitch and speed stability, affecting the quality of audio playback.
Wow: Wow refers to a slow, low-frequency variation in the playback speed of an audio recording. It is often caused by irregularities in the rotational speed of the playback device's motor. When wow occurs, you may notice a slight warbling or oscillating effect in the playback, which can lead to fluctuations in pitch and timing.
Flutter: Flutter, on the other hand, is a faster, higher-frequency variation in playback speed. It can be caused by factors such as mechanical vibrations, imperfections in the media (such as tapes or records), or issues with the playback equipment. Flutter can result in rapid pitch changes and can be more audible than wow.
Both wow and flutter can degrade the audio quality of analog recordings, particularly when playing back music or other content where pitch accuracy and timing are important. Modern digital audio technologies have largely mitigated these issues, as digital formats are not susceptible to the same mechanical and physical limitations as analog media.
In analog audio equipment, especially vintage or high-end systems, minimising wow and flutter was crucial for achieving high-quality audio playback. Manufacturers of analog equipment often used precision engineering and design techniques to reduce these speed irregularities, resulting in more accurate and stable playback.
For collectors and enthusiasts of analog audio equipment, understanding wow and flutter is important when evaluating the performance of vintage turntables, tape decks, and other devices. When purchasing or using analog equipment, it's helpful to consider the specifications and capabilities of the equipment to ensure optimal audio playback quality.
XLR (eXternal Line Return) is a type of audio connector commonly used in professional audio and sound reinforcement systems. XLR connectors are known for their balanced design, which helps minimise noise and interference in audio signals, making them suitable for high-quality audio transmission in various applications.
Key features and uses of XLR connectors for input and output include:
Balanced Audio: XLR connectors are designed for balanced audio signals. A balanced signal consists of two copies of the audio waveform—one in phase and one out of phase. This design helps cancel out any interference or noise that may be introduced along the cable.
Three Pins: XLR connectors typically have three pins—pin 1 (ground/shield), pin 2 (positive/hot), and pin 3 (negative/cold). The balanced audio signal is transmitted between pins 2 and 3.
Microphones and Line-Level Devices: XLR connectors are commonly used for connecting microphones, as well as other professional audio equipment like mixers, preamps, amplifiers, and powered speakers.
Live Sound and Studio Recording: XLR connections are prevalent in live sound setups, studio recording environments, broadcast studios, and other professional audio settings where high audio quality and noise rejection are essential.
Locking Mechanism: XLR connectors feature a locking mechanism that securely holds the connector in place, reducing the chances of accidental disconnection.
Gender: XLR connectors come in male and female versions. A male XLR connector has pins, while a female XLR connector has corresponding receptacles to receive the pins.
Cable Types: XLR cables are available in various lengths and qualities, including microphone cables and balanced audio cables.
Phantom Power: XLR connectors are also used to transmit phantom power, which is a method of providing power to condenser microphones and certain other devices through the same cable used for audio transmission.
XLR connectors are an industry standard in professional audio and are often used for critical applications where signal quality and reliability are paramount. When connecting XLR devices, it's important to match the correct input and output types (male/female) and ensure proper cable routing and management to prevent cable noise and interference.
"Zone 2" and "Zone 3" Pre/Line Out are features commonly found on audio and AV receivers that allow you to send audio signals to additional zones or rooms in a multi-room audio setup. These features enable you to enjoy audio content in different areas of your home, each with its own audio source and volume control. Here's how they work:
Zone 2 Pre/Line Out:
Zone 3 Pre/Line Out:
In both cases, the Pre/Line Out jacks provide flexibility in connecting external audio equipment. Pre-Out signals are unamplified and require an external amplifier, while Line Out signals are typically amplified and can be directly connected to powered speakers.
When setting up a multi-zone audio system using Zone 2 and Zone 3 Pre/Line Out features, you can often select different audio sources for each zone, control the volume independently, and tailor the listening experience to each area. Some receivers may also offer control via a remote or dedicated mobile app.
Keep in mind that the availability and functionality of Zone 2 and Zone 3 Pre/Line Out features can vary depending on the specific audio or AV receiver model. Always refer to the product's manual or specifications to understand how to properly set up and configure multi-room audio using these features.
In the context of projectors, the zoom ratio refers to the range of adjustment available for changing the size of the projected image. It indicates how much the projector's lens can magnify or shrink the image without having to physically move the projector itself. The zoom ratio is expressed as a numerical value, such as 1.2x, 1.5x, 2.0x, etc.
Here's how the zoom ratio works in projectors:
Zooming In (Telephoto): A higher zoom ratio allows you to zoom in on the image, making it larger and filling more of the screen. For example, a projector with a 1.5x zoom ratio can magnify the image to 1.5 times its original size.
Zooming Out (Wide Angle): A lower zoom ratio allows you to zoom out on the image, making it smaller and showing more of the content. For instance, a projector with a 0.8x zoom ratio can shrink the image to 80% of its original size.
The zoom ratio is particularly important when setting up a projector in different environments or when adjusting the screen size to fit the available space. It provides flexibility in projector placement and helps ensure that you can achieve the desired image size without having to physically move the projector or adjust the screen.
A higher zoom ratio is advantageous when you need to adapt the projected image to fit various screen sizes or distances, making it easier to use the same projector in different settings. However, it's important to note that very high zoom ratios can sometimes result in slightly reduced image quality compared to projectors with lower zoom ratios.
When selecting a projector, consider the zoom ratio along with other factors such as resolution, brightness, connectivity options, and lens shift (if available) to ensure that the projector meets your specific needs and can be conveniently set up in your desired location.
Audio Junction strives to make every purchase a happy one.
Please read our Refund, Return Warranty Policy before making a purchase from Audio Junction, our Outlined are Our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
Always inspect any products that we have delivered to you or that you picked up from the Audio Junction store, to make sure you are completely satisfied with the condition of the products, including that the products are of merchantable quality.
If you have any questions about this policy, please contact our staff on click here to email.
Please choose carefully as refunds for change of mind would only be accepted with a restocking fee subject to approval. We recommend you carefully choose any products before adding them to your cart and continuing with your order. The restocking fee is 25% if approved.
If any products are delivered damaged, please contact our Customer service Staff as soon as possible. Audio Junction will organise to have your products returned to Audio Junction and to arrange for a replacement of your products fast. Damaged products need to be returned in the same condition received by you with all original packaging, accessories and manuals.
Audio Junction uses the eWAY Payment Gateway for its online credit card transactions. eWAY processes online credit card transactions for thousands of Australian merchants, providing a safe and secure means of collecting payments via the Internet.
All online credit card transactions performed on this site using the eWAY gateway are secured payments.
Audio Junction will refund all delivery charges in the event an item has to be returned due to a fault or damage and no replacement items can be found. Delivery refund will only be approved within 14 days of purchase and all original packaging, accessories and manuals are included.
Refer to Consumer Guarantee laws for more information.
Any Refunds will be made by Audio Junction using the same method of payment used to make your purchase. Refunds will normally be processed within five (5) days.
Audio Junction reserve the right to refund and cancel any order when the below occurs.
You will be contacted by email to explain why a refund has been issued and products not delivered.
Before returning any goods please contact our service team for approval and return merchandise number 1300 822 600
You may also contact Audio Junction on 1300 822 600 or visit the store where the items were collected. A Audio Junction team member will help you with any return or repair. This will include inspecting the products, organising for the products to be repaired, or offering you a replacement.
Products need to be returned within a reasonable time period. This timeframe may vary from product to product and may depend on the type of product you purchased and the price you paid.
If any goods cannot be easily returned to the Audio Junction store, due to where you are located please contact our service staff for help with logistics 1300 822 600
Products returned under warranty will be assessed and/or repaired within a reasonable time period. You will be provided with a repair time after the item is assessed. This time may vary due to reasons beyond our or the manufacturer's control, such as parts availability and incorrect fault advice given.
You may be required to pay labour, assessment or freight costs, such as where goods are assessed to have been damaged by misuse or accident, or where the goods are assessed not to be faulty. We will provide you with a cost if this case arrises.
If any electrical goods that you returned may lose settings or user saved preferences during the resetting and rebooting phases in a repair sequence.
Purchasing from Audio Junction is an acceptance of the above policies.
If you have any questions relating to your Order, please contact us on 1300 822 600 or email customer support on sales@audiojunction.com.au.
